Hifiverse

CD-/SACD-Player und Transporte - Cyrus Audio CDt-XR

Beschreibung, Bilder, technische Daten und Spezifikationen

Cyrus Audio CDt-XR
Bildquelle - (c) Cyrus Audio

The CDt-XR is a CD transport from Cyrus Audio in the half-width XR series, made in Huntingdon, Cambridgeshire. It succeeded the CDt, and Cyrus lists its production years as 2020 - 2025. Against its predecessor it has revised power supplies, final re-clocking of the digital output, touch controls and a port for the PSU-XR external power supply. The finish is Phantom Black.

Key specs that matter

There is no DAC inside. Outputs are one optical and one coaxial S/PDIF, both driven by a dedicated digital audio output driver. Disc reading uses the latest version of Cyrus Servo Evolution. Power consumption is 20 W, and standby consumption is below 0.5 W. Firmware is user-upgradeable, and the iR14 remote control is included. Size is 75 x 215 x 355 mm (H x W x D) and weight is 3.7 kg, in a die-cast chassis.

Engineering and use context

Servo Evolution is Cyrus's in-house CD servo, designed to read as much data as possible on the first pass rather than rely on re-reads and error correction. According to Cyrus, off-the-shelf mechanisms produce system noise when their stepper motors work during error correction, and Servo Evolution reduces re-reads and corrections by around 20%.

Like all XR models, the CDt-XR has a complete overhaul of the power supplies to each circuit section. A dedicated high-efficiency supply runs the digital control circuits. Separately, a high-capacity linear supply powers the Servo Evolution circuit, the digital master clock, the digital audio output driver, the PLL master clock and the drive motors through independent regulation channels. Cyrus uses a counter-current layout in which power starts at the quietest part of the circuit and flows towards the noisier sections. Re-clocking of the digital signal takes place just before it leaves the case.

On the rear panel are the two digital outputs, MC-BUS, a servo upgrade port, a UI upgrade port and the PSU-XR socket. With five independent regulated supplies, the PSU-XR reduces the dynamic loads on the internal supplies, and firmware later than V2.0 is required for it. Front controls are touch-sensitive, and the touchpad colour is set in the setup menu. Auto-standby engages after 20 minutes in pause or stop and can be disabled.

Pairing

A DAC or an amplifier with a digital input is required. The matching partners are the XR-series integrated amplifiers and preamplifiers with on-board Gen 2 QXR DACs. Cyrus recommends the coaxial connection.

Alternatives

The Cyrus CDi-XR is the XR-series integrated CD player with a built-in DAC.

Spezifikationen

  • Modellbezeichnung

    CDt-XR

  • Transport

    Ja

  • Player

    k. A.

  • SACD-Unterstützung

    k. A.

  • Wandlerchip

    N/A

  • Untere Grenzfrequenz +/- 3dB (CD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (CD) (Hz)

    N/A

  • Untere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Dynamikumfang (CD) (dB)

    N/A

  • Dynamikumfang (SACD) (dB)

    N/A

  • Signal-Rausch-Abstand (CD) (dB)

    N/A

  • Signal-Rausch-Abstand (SACD) (dB)

    N/A

  • Klirrfaktor + Rauschen (CD) (%)

    N/A

  • Klirrfaktor + Rauschen (SACD) (%)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten