Audio Note (UK) builds the CDT Four, a top-loading CD transport, to its Level 4 criteria. It sits above the CDT Three and below the CDT Five in the Audio Note transport range, plays Red Book CD only and, according to Audio Note, is engineered for sonic performance rather than for technical specification figures. Two fascia finishes are offered, anodised aluminium or black acrylic.
Key specs that matter
Optical pick-up is a 3-beam semiconductor laser at 780 nm. Digital outputs are an RCA 75 ohm S/PDIF socket and a balanced XLR 110 ohm AES/EBU socket, both transformer coupled. Mains input is AC 100-120 V or 220-240 V, 50/60 Hz, and maximum power consumption is 50 W. Dimensions are 142 x 445 x 428 mm (H x W x D), and weight is 13 kg.
Engineering and use context
At its core is a Philips CD Pro2LF mechanism, custom modified by Audio Note in-house and loaded from the top. Its power supply is choke-coupled and uses three transformers. Audio Note's SOGON cable carries the signal from the CD mechanism to the digital output stage, and the output transformer is silver-wired.
Compared with the CDT Three, the Level 4 model adds the choke to a three-transformer supply and replaces the AN-Vx silver cable of the lower model with SOGON for the internal link. It also moves from the 300 mm wide, 7.5 kg case of the CDT Three to a full-width chassis.
The CDT Five uses the same case size as the CDT Four. At Level 5 Audio Note adds a tube digital output stage with a tube-rectified power supply, and the weight of that model reaches 22 kg.
Pairing
A DAC with a coaxial S/PDIF or an AES/EBU input is required. The two outputs allow either an unbalanced RCA or a balanced XLR digital connection.
Alternatives
The Audio Note CDT Three is the Level 3 transport, with the same top-loading Pro2LF mechanism and transformer-coupled RCA and XLR outputs in a 300 mm wide case.