Hifiverse

CD-/SACD-Player und Transporte - Nuprime Audio CDT-10

Beschreibung, Bilder, technische Daten und Spezifikationen

Nuprime Audio CDT-10
Bildquelle - (c) Nuprime Audio

The CDT-10 is a CD transport from NuPrime Audio. It has no DAC of its own and passes the disc data to an external converter through its digital outputs. NuPrime describes it as an extension of the digital design of the CDT-8 Pro, with the AC noise filter of the Evolution DAC and an upgraded power circuit. The listed price was USD 2,250, and the model is now discontinued.

Key specs that matter

Decoding is done by a DSP-based decoder with all Red Book error-correction functions. A selectable sampling rate converter (SRC) upsamples CD data at 24-bit resolution. Its optical output runs at 44.1, 48, 88.2, 96, 176.4 and 192 kHz plus DoP64. Coaxial, AES/EBU and HDMI I2S outputs cover 44.1 kHz to 768 kHz, including 352.8, 384, 705 and 768 kHz, plus DoP64, DoP128 and DoP256. Mains input is 100 - 240 V AC with a 1 A slow-blow fuse. Dimensions are 59 x 215.4 x 382.6 mm (H x W x D), and weight is 5 kg.

Engineering and use context

One master clock controls the entire decoding system. Discs are read at single speed, which NuPrime uses to minimise vibration and problems with unbalanced discs.

NuPrime compares the structural integrity of the chassis with that of a submarine. Inside it, the transport mechanism is sandwiched between aluminium plates to reduce vibration. A custom R-type professional transformer with shielding supplies the circuit, and the AC noise filter from the Evolution DAC sits at the mains input.

The HDMI I2S output is intended for connection with other NuPrime products and may not work with other devices. NuPrime supplies its vibration-free isolation feet and an aluminium remote control. The case is anodised aluminium in black or silver.

Pairing

An external DAC with a coaxial, optical or AES/EBU input is required. The HDMI I2S output requires a NuPrime DAC with an I2S input. Any DAC used has to accept the selected SRC rate and DoP.

Alternatives

The CDT-8 Pro is the earlier NuPrime CD transport on which the CDT-10 is based.

Spezifikationen

  • Modellbezeichnung

    CDT-10

  • Transport

    Ja

  • Player

    Ja

  • SACD-Unterstützung

    k. A.

  • Wandlerchip

    N/A

  • Untere Grenzfrequenz +/- 3dB (CD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (CD) (Hz)

    N/A

  • Untere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (SACD) (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Dynamikumfang (CD) (dB)

    N/A

  • Dynamikumfang (SACD) (dB)

    N/A

  • Signal-Rausch-Abstand (CD) (dB)

    N/A

  • Signal-Rausch-Abstand (SACD) (dB)

    N/A

  • Klirrfaktor + Rauschen (CD) (%)

    N/A

  • Klirrfaktor + Rauschen (SACD) (%)

    N/A

  • Abmessungen (mm)

    59 x 215.4 x 382.6

  • Gewicht (kg)

    5

  • Offizieller Link

Weitere Komponenten