The STUDIOMASTER CD100 is a CD player from Revox, announced in May 2026 at EUR 1,895. Revox specifies it for use with the STUDIOMASTER M500 and M300 amplifiers and for integration into its Multiuser 3.0 system, and it is offered in black, silver and white.
Key specs that matter
The audio drive is a CLV type and plays CD-DA and CD-R discs. Digital-to-analogue conversion uses a Burr-Brown PCM1796 DAC. At the analogue output, frequency range is 5 Hz - 20 kHz, THD+N is below 0.0019% and dynamic range is 118 dB. Signal-to-noise ratio is above 110 dB at 1 kHz, channel separation is above 97 dB at 1 kHz, and DC offset is 0.0005 V. One coaxial and one optical digital output carry 44.1 kHz/16-bit data, with THD+N below 0.0018%. Dimensions are 88 x 200 x 342 mm (H x W x D), weight is 3.05 kg, and power consumption is 0.4 W in standby and 7.5 W ± 1.5 W in operation from a 100 - 240 V AC, 50 - 60 Hz mains supply.
Engineering and use context
Its housing is solid aluminium with a glass front. An M500 or M300 is connected with two cables, a coaxial link for the digital audio signal and a data link for control. Revox includes the Control Port CD Player Connection Cable, which runs from the USB port of the amplifier to the RS232 control input of the player, together with a coaxial cable and a power cable. Configuration is automatic - the coaxial input is renamed CD Player, the display icon changes and the configurator settings are applied.
Once selected as a source, the CD100 switches on, reads the disc and shows its content in the Multiuser App. Playback time and status messages such as Reading, Play, Pause, Stop, No CD and Read Error appear in the app and on the front display of the amplifier. Switching to another source on the M500 or M300 turns the player off. If the coaxial input is already occupied, the optical or analogue input can be assigned in the configurator instead. Control options are the front buttons, the Multiuser App, IR commands in RC5 code and RS232. Through the CD-Link interface the player is also backward compatible with the Revox Joy S119 and S120 MKII network receivers.
Pairing
The matching amplifiers are the STUDIOMASTER M500 and M300. With any other amplifier the analogue output connects to a line-level input. The coaxial and optical outputs allow conversion in an external DAC.
Alternatives
The earlier Revox Joy S22 is a CD player that connects to Joy receivers through CD-Link.