The CD80 II is a compact CD player from Shanling with a tray-loading mechanism, a dedicated headphone amplifier, a USB drive input and Bluetooth. It combines the design of the original CD80 with the styling of the Shanling CD-S100, and with dimensions of 28 x 20 x 5 cm it is Shanling's smallest fully equipped CD player. Compared with its predecessor, it adds a balanced headphone amplifier. Its aluminium chassis is anodised in silver or black.
Key specs that matter
Supported discs are CD, CD-R and CD-RW audio CD, and SACD is not supported. The DAC chip is a Cirrus Logic CS43198 and the main processor is an Ingenic X1000E. RCA output level is 2.6 Vrms, with frequency response 20 Hz - 40 kHz (-0.2 dB), THD+N 0.0004%, dynamic range and SNR of 124 dB and output impedance of 100 ohms. Output power from the 4.4 mm balanced headphone output is 850 mW at 32 ohms, with THD+N 0.0007%, channel separation 112 dB (32 ohms), SNR 127 dB and output impedance 0.7 ohms. The 3.5 mm single-ended output gives 215 mW at 32 ohms, with channel separation 75 dB (32 ohms), SNR 125 dB and output impedance 0.4 ohms. USB drives up to 2 TB are supported, with PCM up to 384 kHz/32-bit and DSD256. Bluetooth 5.0 supports LDAC, AAC and SBC. Coaxial S/PDIF output carries PCM up to 192 kHz/24-bit, without DSD. Dimensions are 280 x 205 x 52 mm (W x D x H), weight is approx. 2.6 kg and power consumption is 20 W.
Engineering and use context
Shanling uses the same 4th Generation CD system as in the CD-S100, which combines an HD850 laser with a tray-style mechanism. Two SGM8262 amplifiers form the dedicated headphone output stage. Panasonic FC capacitors are used in the audio circuit.
Output modes are Pre-Out, Line-Out and HP-Out, and gain switches between High and Low. Playback settings include digital filters, channel balance, USB gapless playback and USB replay gain. A 1.28-inch colour LCD with 240 x 240 pixels and a new user interface gives access to these settings. Control is by front-panel buttons and a volume wheel, the supplied remote control, or the Eddict Player app, which connects over Bluetooth through the SyncLink function and browses the files on a USB drive. Each player comes with a power cable, a Bluetooth antenna and manuals. The CD80 II carries Hi-Res Audio and Hi-Res Wireless Audio certification from the Japan Audio Society.
Pairing
In Pre-Out mode the RCA output can drive a power amplifier or active speakers directly. The coaxial output allows use as a transport with an external DAC. Headphones for the balanced output require a 4.4 mm cable.
Alternatives
The CD-S100 is the larger and more advanced CD player in the Shanling range.