Hifiverse

Subwoofer - Focal SW 1000 BE

Beschreibung, Bilder, technische Daten und Spezifikationen

Focal SW 1000 BE
Bildquelle - (c) Focal

The SW 1000 Be is an active bass-reflex subwoofer from Focal. It is the redesigned version of the Electra Be subwoofer, reworked for compatibility with the other loudspeakers of the Sopra line. Black Lacquer is the standard finish, and the US price was USD 5,499.

Key specs that matter

A 33 cm W cone woofer is driven by a 600 W RMS (750 W max.) BASH amplifier. Frequency response is 20 Hz - 150 Hz (±3 dB), the low frequency point is 18 Hz (-6 dB), and Focal quotes an SPL of 118 dB. A 24-bit DSP sets the low-pass filter from 50 Hz to 150 Hz in 5 Hz steps at 24 dB/oct., and a 48 dB/oct. subsonic filter is adjustable up to 45 Hz or switched off. Inputs are LFE, stereo RCA and coaxial digital (S/PDIF), with a digital output for further units. Dimensions are 535 x 500 x 432 mm (H x W x D), and net weight is 42 kg.

Engineering and use context

Focal develops and manufactures the woofer in France. Its W cone is a sandwich of two glass sheets on either side of a central foam body, a construction that controls lightness, rigidity and damping. Focal links the high rigidity to low distortion even at high volume. On the front baffle, a laminar port is intended to avoid dynamic bass compression.

The DSP replaces the analogue filter module used in most subwoofers, and an LCD control panel shows its settings. Phase is adjustable from 0 to 180 degrees in 30 degree steps, and gain from -6 dB to +6 dB. Boost mode raises the bass level by up to 6 dB at 30, 40 or 50 Hz. In Night mode the DSP applies digital dynamic compression, lifting weak signals and reducing strong ones. Three memory presets store complete settings, and the low-pass filter can be set to Off when the AV amplifier filters are used.

All functions are accessible from a full-function infrared remote control, and a Remote Lock setting disables infrared reception so that other remote controls do not interfere. Power modes are On, Off and Autopower. In Autopower the subwoofer starts on an audio signal at the analogue inputs and goes to standby after about 15 minutes without one.

Several units can be connected in series over the digital link. The first master unit receives the analogue signal and drives the slave units in the digital domain, its settings apply to all of them, and on each slave only gain and phase remain adjustable.

Pairing

A stereo preamplifier with line outputs or an AV amplifier with a subwoofer output is required. The stereo RCA inputs and the LFE input can be connected at the same time for stereo and multichannel use.

Alternatives

The Focal Sub 600P is a smaller powered subwoofer from the brand.

Spezifikationen

  • Modellbezeichnung

    SW 1000 BE

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Endverstärker (W)

    N/A

  • Größe (sm)

    50.0 × 53.5 × 43.2

  • Gewicht (kg)

    42

  • Offizieller Link