Hifiverse

Subwoofer - Cabasse SANTORIN 30-500

Beschreibung, Bilder, technische Daten und Spezifikationen

Cabasse SANTORIN 30-500
Bildquelle - (c) Cabasse

The Santorin 30-500 is an active subwoofer from Cabasse, the loudspeaker maker based in Brittany, France. It is a sealed design with one woofer and a built-in amplifier. In Cabasse's subwoofer range it sits above the Santorin 30-200. The French price is EUR 3,200 in black lacquer.

Key specs that matter

The driver complement is 1 x 30 cm 30ND40 woofer with a honeycomb dome diaphragm. Amplifier power is 500 W RMS nominal and 1000 W peak. Frequency response is 22 - 200 Hz (semi-reverberant chamber), and maximum SPL is 106 dB. The low-pass cut-off is adjustable from 30 to 200 Hz in 1 Hz steps, phase from 0 to 180° in 1° steps and delay in 30 cm steps. Level is adjustable from -30 dB to +6 dB in 1 dB steps. Power requirements are 110 - 120 V or 220 - 240 V AC, 50/60 Hz, with a maximum consumption of 625 W. The cabinet measures 43 x 38 x 47 cm (H x W x D) and weighs 28 kg.

Engineering and use context

Cabasse mounts the woofer so that it radiates vertically downward over 360°. According to Cabasse, this layout gives a very regular frequency response in the listening room. The 30ND40 was developed specifically for use in a sealed enclosure without a bass-reflex port.

On the rear panel there are RCA low-level inputs, high-level inputs and outputs on speaker terminals, and balanced XLR inputs. The RCA and high-level inputs can be used at the same time, and the source and input channels (right, left or both) are selected on the front panel, which has an LCD display. In AUTO mode the subwoofer switches itself on with an audio signal and goes into standby after 20 minutes without one. Up to three settings, automatic or manual, can be stored and recalled from the supplied remote control.

Pairing

A preamplifier or AV processor with an RCA or XLR subwoofer or LFE output is required, or the speaker outputs of an amplifier through the high-level inputs. The high-level outputs pass the signal on to the main speakers. Phase and delay settings allow alignment with main speakers at a different distance from the listener.

Alternatives

The Santorin 30-200 uses the same 30ND40 woofer with a 200 W nominal, 400 W peak amplifier and a frequency response of 29 - 180 Hz.

Spezifikationen

  • Modellbezeichnung

    SANTORIN 30-500

  • Untere Grenzfrequenz +/- 3dB (Hz)

    22

  • Obere Grenzfrequenz +/- 3dB (Hz)

    200

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    500

  • Größe (sm)

    43 x 38 x 47

  • Gewicht (kg)

    28

  • Offizieller Link