Hifiverse

Subwoofer - Axelvox RS10

Beschreibung, Bilder, technische Daten und Spezifikationen

Axelvox RS10
Bildquelle - (c) Axelvox

The RS10 is the active subwoofer of the Axelvox R series, which also includes the R5 and R6 near-field monitors. Axelvox was set up in 2005 within the iconBIT group, and the R series was introduced in 2025. The manufacturer is iconBIT Limited of Hong Kong, and the RS10 is made in China. Axelvox describes the R-series monitors as designed for home and project studios, for stereo or multichannel mixing.

Key specs that matter

Frequency range is 36 Hz - 150 Hz. The RS10 is equipped with a single 250 mm LF driver and has no tweeter. Amplifier power is 150 W, 270 W peak. Signal-to-noise ratio is 98 dB. Dimensions are 383 x 355 x 398 mm, and weight is 18 kg. A 5 x 20 mm mains fuse is used, rated 3.15 A, or 1.6 A for 100 - 120 V operation.

Engineering and use context

All connections and controls sit on the rear panel. For the left and right channels there are balanced line inputs, balanced XLR inputs with XLR outputs, and unbalanced RCA inputs with RCA outputs. A LOW PASS FREQ control sets the low-pass filter between 50 Hz and 120 Hz. Next to it, the PHASE switch selects 0 or 180 degrees, and the volume control runs up to +6 dB. Its mains section has a power socket, an input voltage selector, a power switch and a power indicator. Supplied with the subwoofer are a power cable and a user manual, and the warranty is 12 months.

Within the R series the RS10 is the only model rated below 50 Hz. The R5 is rated 60 Hz - 20 kHz and uses a 130 mm LF driver with a 25 mm tweeter, and the R6 is rated 50 Hz - 20 kHz with a 165 mm LF driver and the same 25 mm tweeter.

Pairing

The matching monitors are the R5 and R6. Its XLR and RCA outputs connect the satellite monitors through the subwoofer. Sources with balanced or unbalanced line outputs can be connected directly.

Alternatives

The RS10 is the only subwoofer in the Axelvox R series.

Spezifikationen

  • Modellbezeichnung

    RS10

  • Untere Grenzfrequenz +/- 3dB (Hz)

    36

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150

  • Empfindlichkeit (dB at 1 W/1m)

    96

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    150 RMS (270 Peak)

  • Größe (sm)

    38.2 х 35.5 х 39.8

  • Gewicht (kg)

    18

  • Offizieller Link