The PSW 505 is a powered subwoofer from Polk Audio with a 305 mm driver, finished in black. It combines a front-firing long-throw woofer, a class D amplifier and a slot-loaded port, and it accepts LFE, line-level and speaker-level signals. Polk now lists it among its archived products. Its owner's manual is shared with the PSW303 and PSW404, which use 203 mm and 254 mm drivers.
Key specs that matter
Its 305 mm Dynamic Balance woofer is front-firing and magnetically shielded, with a high excursion polymer composite cone and a Hi-Roll surround. The amplifier is class D, rated at 300 W continuous and 460 W dynamic. Total frequency response is 23 - 160 Hz, and the -3 dB limits are 28 Hz and 125 Hz. Inputs are an unfiltered LFE input, filtered left and right line-level inputs and two pairs of gold-plated 5-way binding posts. Speaker-level outputs sit alongside them. Controls are a variable low pass filter, a 0/180 degree phase switch, volume and a power switch with on, auto and standby positions. Dimensions are 462 x 384 x 464 mm (H x W x D), and weight is 19 kg.
Engineering and use context
Polk describes the enclosure as vented through a Slot Load Vent and states that this port reduces turbulence and distortion. The Hi-Roll foam surround gives the cone more freedom of movement, and the driver is Klippel-optimised.
The LFE input bypasses the variable low pass filter. With the auto setting the auto on/off circuitry switches the subwoofer on when it senses a program signal and off a few minutes after the signal stops. The power cord is detachable.
Pairing
An AV receiver with a SUB OUT connects to the LFE input. A preamplifier or receiver with PRE OUT connects to the line-level inputs. A stereo amplifier without a subwoofer output connects to the speaker-level inputs, and the front speakers then connect to the speaker-level outputs of the PSW 505.
Alternatives
The Signature Elite ES12 is a later Polk subwoofer with a 305 mm mineral-filled polypropylene cone woofer, dual Power Ports and a 300 W class D amplifier.