The Mini T Sub is a powered subwoofer from Bryston, the Canadian manufacturer whose loudspeakers are built in Canada. It belongs to the Model T series, where Bryston offers four subwoofers - the Model T Sub, the Mini T Sub, the T-8 and the T-12. Bryston describes it as somewhat smaller than the Model T Sub, and it uses two drivers where the larger model uses three.
Key specs that matter
Frequency response is 25 Hz - 150 Hz (±3 dB). Dynamic range, or maximum SPL, is 108 dB at 1 m (anechoic). The built-in amplifier is rated at 600 W RMS. Driver complement is two 203 mm aluminium cone bass drivers. Inputs are RCA, XLR and high-level binding posts, and outputs are RCA and XLR. Crossover frequency is selectable at 40, 60, 80, 100 or 150 Hz, phase is switchable between 0 and 180 degrees, and a volume control is provided. Size is 610 x 267 x 424 mm (H x W x D), and weight is 40 kg unpacked. Standard finishes are Walnut, Boston Cherry and Black Ash, with others available on request.
Engineering and use context
Bryston builds the Mini T Sub like its floorstanding loudspeakers, with the woofers in a vertical array. According to Bryston, the different boundary conditions of each woofer in this array help smooth floor bounce without equalisation. Each driver is visually similar to the bass units of the full-range Bryston loudspeakers. It has a custom suspension for very long throw and a custom voice coil designed to take high power over long periods without compression or thermal breakdown.
The amplifier operates in class D and is powered by a linear power supply. Bryston states that this supply provides current on demand without high-frequency switching noise in the signal path. Level and crossover controls are on the amplifier, together with the line-level and high-level inputs.
Black fabric grilles are supplied. Padded feet and spikes come with the subwoofer, and both screw into threaded inserts in the base of the cabinet. Bryston specifies the padded feet for hard floors and the spikes for carpet.
Pairing
A preamplifier or AV processor with an RCA or XLR subwoofer output is required for line-level connection. An amplifier without a line-level subwoofer output connects through the high-level binding posts. The matching main loudspeakers are the Bryston Mini T and the other Model T series models.
Alternatives
The Bryston Model T Sub is the larger version, with three 203 mm aluminium cone drivers, the same 600 W amplifier and response down to 18 Hz.