The MB10 is an active subwoofer in the MB series of Scansonic HD, the Danish loudspeaker brand of Dantax Radio A/S in Pandrup. Scansonic builds on the experience of the high-end brand Raidho and passes its technology down to more affordable ranges, with ribbon tweeters, carbon fibre and Kevlar in critical places. Its most critical series are built in-house in Denmark. The MB series also includes the MB1 B, MB5 B, MB6 B and MB Center B loudspeakers, and the MB10 is designed both for a home cinema setup and for a stereo system. Black-silk and White-silk are the two finishes.
Key specs that matter
A 10-inch long-throw, low-mass driver is mounted down-firing in a rear-ported enclosure. Power comes from a built-in amplifier rated at 100 W RMS. Frequency response is 25 Hz - 150 Hz (adjustable). Inputs are a line input and a low-impedance input. Power consumption is below 0.9 A in standby and 10 - 300 W in operation. The cabinet measures 360 x 418 x 360 mm (W x H x D) and weighs 15.4 kg.
Engineering and use context
Scansonic uses a class A/B amplifier in the MB10 instead of the class D amplification commonly used in subwoofers. Its rear-ported enclosure is tuned to match the low-mass woofer. According to Scansonic, with this combination of amplifier, driver and enclosure tuning no frequency equalisation circuits are used.
Pairing
The line input connects to the subwoofer output of an AV receiver or surround processor. An amplifier without a sub out connects through the low-impedance input at speaker level. Matching loudspeakers are the Scansonic HD MB series models, including the MB Center B for a home cinema system.
Alternatives
The L-8 is the smaller Scansonic HD subwoofer, with an 8-inch long-throw woofer in a bass reflex enclosure and a class A/B amplifier rated at 100 W RMS.