Hifiverse

Subwoofer - Neumann KH 810 II

Beschreibung, Bilder, technische Daten und Spezifikationen

Neumann KH 810 II
Bildquelle - (c) Neumann

The KH 810 II is an active DSP-controlled subwoofer from Neumann, part of a second-generation family with the KH 805 II and the twin-driver KH 870 II. Neumann states that it delivers about twice the output of the KH 750 DSP, and a KH 810 II AES67 version is also available. Launch prices were USD 3,699, GBP 3,333 and EUR 3,869.

Key specs that matter

A 265 mm long-throw bass driver with ELFF technology sits behind a black metal grille and is driven by a 180 W amplifier (THD+N 0.1%, with limiter). Free-field frequency response is 18 - 310 Hz (±3 dB) and 16 - 750 Hz (±6 dB), with a ripple of ±1.5 dB from 20 to 295 Hz. Maximum SPL at 3% THD and 1 m is 109 dB on the floor, 112 dB against a wall and 115 dB in a corner, and 117 dB bass managed. Self-generated noise is below 20 dB(A) at 10 cm. Dimensions are 368 x 330 x 645 mm (H x W x D), external net volume is 78 l and weight is 25.5 kg.

Engineering and use context

Its wood cabinet with an aluminium electronics panel is a bass reflex design with the ports at the front and built-in rubber feet for acoustic isolation. The finish is metallic anthracite (RAL 7021) on the front and black (RAL 9005) on the back. Internal signal resolution is 32-bit, with 64-bit double-precision processing. The crossover is set at 80 Hz with a 24 dB per octave (4th order) slope, and the bass manager covers stereo, surround and 3D systems up to 7.1.4. Latency is 2 ms (A-D-A), and delay is adjustable from 0 to 115 ms in 20.8 µs steps.

Protection comes from soft clip, peak and thermal limiters plus a woofer excursion limiter. Neumann uses a universal switched-mode power supply for 100 - 240 V at 50/60 Hz. Consumption is 35 W at idle and 252 W at full output, and auto standby (300 mW or less) follows after 20 minutes by default. A ground lift is provided against ground loops. The illuminated logo shows white in normal operation, rosé for identification and red for limit, clip, error, protection or mute.

Pairing

Mid-sized monitors such as the KH 150 and KH 310 are the intended partners. Two electronically balanced XLR inputs and outputs (input impedance above 12 kohms) connect a stereo pair. For multichannel systems two Sub-D 25 inputs accept up to 12 analogue channels and two Sub-D 25 outputs carry up to 11. Digital input is AES3 on BNC, with seven BNC multichannel outputs, and a daisy-chain input and output allow subwoofer arrays.

Alternatives

The Neumann KH 805 II is the smaller subwoofer in the same second-generation family.

Spezifikationen

  • Modellbezeichnung

    KH 810 II

  • Untere Grenzfrequenz +/- 3dB (Hz)

    18

  • Obere Grenzfrequenz +/- 3dB (Hz)

    300

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    200

  • Größe (sm)

    360 × 330 × 645

  • Gewicht (kg)

    26

  • Offizieller Link