Hifiverse

Subwoofer - Proficient Audio FDS-12

Beschreibung, Bilder, technische Daten und Spezifikationen

Proficient Audio FDS-12
Bildquelle - (c) Proficient Audio

The FDS-12 is a powered subwoofer in the Protege Series from Proficient Audio, an American maker of speakers for home cinema, architectural and outdoor installations. Proficient states that the Protege line carries on the technology of its Sunfire subwoofers. The series is built in four sizes from 8 to 15 inches, and this is the 12-inch model, in a matte black cabinet. Protege sits below Proficient's Signature series.

Key specs that matter

Active driver is one 12-inch high-excursion polypropylene cone, with two 12-inch high-excursion polypropylene passive radiators. Amplifier power is 600 W (peak). Frequency response is 24 - 160 Hz (±3 dB), and the crossover frequency is adjustable from 50 to 160 Hz. Dimensions are 375 x 393 x 394 mm (L x W x H) and weight is 16.5 kg. Mains voltage is selectable between 100-120 V and 220-240 V, 50-60 Hz. Proficient gives a two-year warranty.

Engineering and use context

Proficient describes the active woofer as a high back-EMF design with over-sized magnets generating high motor force. Every Protege model uses the same triple-driver configuration of one active driver and dual passive radiators. According to Proficient, this passive radiator design keeps the cabinet profile smaller. Its amplifier is a Class D design exclusive to the series.

All controls are on the rear amplifier panel. Volume, crossover and a 0 or 180 degree phase switch sit above the low-level inputs, which are a left and right RCA pair and a separate LFE input. Setting the crossover control to its 160 Hz/LFE position leaves the low-pass filtering to an AV processor. An ON-AUTO-OFF switch sets the turn-on mode, and in AUTO the subwoofer goes into standby after about 15 minutes with no signal and turns back on when a signal is detected. A status indicator glows blue in operation and red in standby.

For wireless use the panel has a built-in 5 V, 500 mA USB port and mounting standoffs that power and hold the optional subwoofer wireless receiver. Mains power enters through an IEC connector with a detachable line cord, and a slow-blow fuse protects the electronics.

Pairing

An AV receiver or processor connects through its subwoofer (LFE) output to the LFE input. A stereo preamplifier or receiver with line-level outputs connects to the left and right low-level inputs. Shielded RCA cables are required.

Alternatives

The FDS-15 is the largest Protege model, with a 15-inch active driver, two 15-inch passive radiators and 1,000 W peak amplifier power.

Spezifikationen

  • Modellbezeichnung

    FDS-12

  • Untere Grenzfrequenz +/- 3dB (Hz)

    24

  • Obere Grenzfrequenz +/- 3dB (Hz)

    160

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    600

  • Größe (sm)

    37.5 x 39.3 x 39.4

  • Gewicht (kg)

    N/A

  • Offizieller Link