Hifiverse

Subwoofer - Gold Note Diana III-F

Beschreibung, Bilder, technische Daten und Spezifikationen

Gold Note Diana III-F
Bildquelle - (c) Gold Note

The Diana III-F is the bass extension module of Gold Note's Diana loudspeaker line, built by the Florence company for its Diana I and Diana II stand-mount models. Gold Note calls it a floor-standing loudspeaker extender with a passive subwoofer and front bass reflex, and describes it as the first modular extender that turns the two bookshelf models into floorstanding loudspeakers. As a passive design, it has no built-in amplifier.

Key specs that matter

Each module has one 165 mm glass fibre woofer in a 23 dm3 cabinet with a front bass-reflex port. F-3 is 38 Hz. Sensitivity is 91 dB/SPL, and nominal impedance is 8 ohms. The crossover is an 80 Hz low-pass. Suggested amplifier power is 10 - 150 W. Each module measures 240 x 534 x 400 mm (W x H x D), and a pair weighs 22 kg net. Cabinet finish is black matt.

With the extender, the Diana I becomes a 2.5-way bass reflex system with a 35 dm3 total volume, a crossover at 80 - 2900 Hz, a frequency response of 38 - 20,000 Hz (±3 dB) and 88 dB sensitivity. That stack measures 260 x 820 x 417 mm and weighs 36 kg per pair. Combined with the Diana II, it reaches 46 dm3 and 91 dB, at 260 x 990 x 420 mm and 44 kg per pair.

Engineering and use context

Magnets in the two cabinets keep the stand-mount aligned on top of the extender. Gold Note's Diana Bridge is inserted at the binding posts to connect the two modules, carrying the audio signal and adding structural rigidity to the whole loudspeaker. A self-adjustment and automatic recognition system is used for coupling with either the Diana I or the Diana II. According to Gold Note, the extender cabinet is designed to minimise vibrations. Four adjustable spikes sit in the base, with a recommended height of 20 mm and spike pads supplied, and in a stereo pair the two modules act as separate left and right subwoofers.

Within the family, the Diana I is a two-way with a 25 mm silk dome tweeter and a 165 mm fibreglass cone mid-woofer. The Diana II has two 165 mm treated paper mid-woofers in a D'Appolito layout. Gold Note also lists the Diana Center, its first product for home theatre. Gold Note quotes the sensitivity of the Diana models as high enough for power amplifiers of 10 W.

Pairing

A Diana I or Diana II stand-mount is required on top. An amplifier within the suggested power range is required.

Alternatives

Gold Note offers no other subwoofer or bass module, and the III-F is the only extender in the Diana line.

Spezifikationen

  • Modellbezeichnung

    Diana III-F

  • Untere Grenzfrequenz +/- 3dB (Hz)

    38

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Verfügt über interne Verstärkung

    k. A.

  • Endverstärker (W)

    N/A

  • Größe (sm)

    24.0 × 53.4 × 40.0

  • Gewicht (kg)

    22

  • Offizieller Link