Hifiverse

Subwoofer - ELAC Debut 2.0 S10.2

Beschreibung, Bilder, technische Daten und Spezifikationen

ELAC Debut 2.0 S10.2
Bildquelle - (c) ELAC

The Debut 2.0 S10.2 (part number DS102-BK) is a powered subwoofer from the Debut 2.0 series, which Andrew Jones designed for ELAC. ELAC Americas introduced it in 2018 as the bass complement to the Debut 2.0 loudspeakers, at a US price of USD 399. The cabinet is finished in Black Ash vinyl.

Key specs that matter

It is a powered bass-reflex subwoofer with a dual flared port and one 254 mm high-excursion woofer with a doped paper cone. Frequency response is 35 - 150 Hz. The crossover is continuously adjustable from 50 Hz to 150 Hz. Its BASH tracking amplifier is rated at 100 W RMS and 200 W peak, with THD below 0.1%. Standby power consumption is 0.5 W. The cabinet measures 343 x 343 x 343 mm (W x H x D), and net weight is 13.0 kg. An AC power cable is the only accessory included.

Engineering and use context

ELAC describes the woofer as a custom long-throw driver. Inside the MDF cabinet, a horizontal brace strengthens and stiffens the walls and reduces unwanted vibration.

All ELAC subwoofers use BASH tracking amplifiers. According to the owner's manual, this is a class A/B power amplifier whose supply voltage is regulated by a class D circuit and tracks the input signal. The audio signal itself is amplified in the analog domain, and ELAC states that this minimises the high-frequency interference typical of class D amplifiers.

The rear panel carries a Level control, a Low pass control for the crossover frequency, and a Phase switch that inverts the polarity of the subwoofer by 180 degrees. A three-position power switch selects On, Off or Auto. With Auto selected, the S10.2 switches on when it detects an audio signal and powers off after a long period of inactivity. A blue indicator shows that it is on.

Pairing

The line-level RCA inputs are Left and Right. A single subwoofer or LFE output of an AV receiver connects to the Left input. A preamplifier or stereo system without a dedicated subwoofer output connects to both inputs from its stereo pre-outs. RCA cables are not supplied, and there are no speaker-level inputs.

Alternatives

The ELAC Varro PS250 is a larger subwoofer with a 254 mm treated paper woofer, a 250 W RMS BASH amplifier and app control over Bluetooth Low Energy.

Spezifikationen

  • Modellbezeichnung

    Debut 2.0 S10.2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    100 (RMS); 200 (Peak)

  • Größe (sm)

    34.3 x 34.3 × 34.3

  • Gewicht (kg)

    13

  • Offizieller Link