The Alumine S10 is an active subwoofer from Stenheim of Switzerland. It was shown as the Alumine Sub at High End Munich 2025 and presented as the Alumine S10 at High End Vienna 2026. Stenheim designed it principally to complement its own Alumine range, and it also works with speakers from other brands. Owners of the smaller Alumine Two and Two.Five get extended bass, especially in larger rooms, and the S10 can also be added to the Alumine Three and Five.
Key specs that matter
Two 26 cm (10 in.) high-excursion drivers are used in an isobaric topology with an acoustic suspension alignment. A 1200 W amplifier is built in. Frequency response is 20 Hz - 100 Hz. Inputs are XLR or high-level (balanced, selected by a switch), RCA, Toslink, coaxial S/PDIF, AES on XLR and RJ45 Ethernet. Outputs are XLR (pass-through or filtered), RCA pass-through and Toslink pass-through. Dimensions without spikes are 320 x 342 x 430 mm (W x H x D), and weight is 44.5 kg. Standard finishes are Light Grey and Dark Grey with black front and rear panels, with Full Black, Ivory and Mocca as custom options. Warranty is three years on the electronics and five years on the passive elements.
Engineering and use context
Construction is full aluminium, and the cabinet has three independent internal chambers. In the isobaric arrangement Stenheim maintains constant pressure between the two drivers, and the company states that this lowers distortion levels and minimises overall size.
On-board digital signal processing gives control over frequency, gain and phase. These parameters are adjusted remotely from an Android or iOS app on a smartphone or tablet, or from a dedicated web page. Both communicate with the S10 over a wired Ethernet connection, and the same link allows future software upgrades. Presets for the Alumine line are stored, and the low-pass filter is adjustable.
Each S10 is UPnP and Roon compatible. Its range of connections is intended for a wide variety of audio systems, and Stenheim also lists it for home cinema installations. It can also be daisy-chained.
Pairing
Analogue sources connect over XLR, RCA or the high-level input. Digital sources connect over Toslink, coaxial S/PDIF or AES. A mains connection is needed for the built-in amplifier.
Alternatives
Stenheim offers no other subwoofer.