The X Diamond is a three-way floorstanding loudspeaker in the X Series of Estelon, founded in Estonia in 2010 by Alfred Vassilkov. Its current version is the X Diamond Mk II, which Estelon presents as the closest alternative to its Extreme Mk II for smaller listening spaces. Accuton drivers with a diamond tweeter are mounted in a sculpted cabinet of marble-based composite.
Key specs that matter
Design is three-way passive with bass reflex loading. Drive units are a 280 mm ceramic sandwich woofer, a 173 mm ceramic mid-woofer and a 25 mm diamond inverted-dome tweeter, all from Accuton. Crossover points are 77 Hz and 2 kHz. Frequency response is 23 Hz - 60 kHz, linear to 33 kHz. Sensitivity is 87 dB (2.83 V). Nominal impedance is 6 ohms (min. 3.5 ohms at 25 Hz). Power rating is 200 W, and minimum amplifier power is 30 W. Dimensions are 1370 x 450 x 640 mm (H x W x D), and net weight is 86 kg per piece. Recommended room size is 25 - 80 m2.
Engineering and use context
All three drivers are custom-designed with Accuton. Each sits in its own internal chamber - the woofer in a bass reflex chamber and the tweeter in an isolated chamber shaped for wide dispersion. Estelon places the woofer near the floor to couple with that surface, while the mid-woofer and tweeter are mounted higher on the cabinet in close vertical alignment. A curved front baffle keeps the drivers equidistant from the listener.
Its cabinet has no flat or parallel surfaces and is made from Estelon's proprietary marble-based composite, which the company describes as rigid, dense and acoustically inert. Internal damping uses a mix of natural and synthetic materials, placed according to measurements and listening tests.
Estelon uses a second-order crossover network. Components include Mundorf and Jantzen capacitors with Goertz and Mundorf inductors, hand-soldered in a star-wired configuration with Estelon's flat foil direct coupling. Internal cabling is by Kubala-Sosna.
Each X Diamond Mk II is hand-finished over several weeks in a twelve-layer painting, wet sanding and polishing process. Standard finishes are Black Lava, Blue Cobalt, Red Rocket, Silver Pure Alu and Violet Night Liquid Gloss, Silver Pure Alu Matte, White Gloss and White Matte. Custom finishes are available on request.
Pairing
An amplifier stable into low impedances in the bass region is required. The X Series also includes the X Centro Diamond.
Alternatives
The XB Diamond is another model of the Estelon X Series.