The WR3 is a full-range electrostatic loudspeaker from the Hungarian company founded by Otto Popori, who began repairing electrostatic speakers in 1996 and built his first design in 2001. Its current line was developed together with industrial designer Gabor Marko and his father Istvan Marko, a craftsman. Today the range is sold under the Prodigio Audio name, and this model is listed as the WR3 Alisca. In a six-model range topped by the Vitorla, it is the smallest speaker, specified for rooms of up to 20 m2 and for near-field listening. In the US it was shown in 2025 at USD 18,000.
Key specs that matter
Frequency response is 30 Hz - 20 kHz. Sensitivity is 88 dB, and impedance is 2.5 ohms minimum. Prodigio specifies THD below 0.2%. Foil area is 0.4 m2 per speaker. Full dimensions are 1623 x 360 x 365 mm (H x W x D), and weight is 33 kg per speaker.
Engineering and use context
Prodigio describes the WR3 as a pure electrostatic panel. Every Prodigio loudspeaker is built in small numbers, with CNC-machined structural parts and hand assembly, and each unit is measured and auditioned before completion. According to the company, this work rests on nearly three decades of experience with electrostatic systems.
Finish is chosen in the Prodigio configurator. Wing colours are deep black, pure white, red, pink, blue, wood and orange, the front accent comes in a similar palette with ebony wood in place of plain wood, and the spikes are stainless steel or black matt. Fully custom colours can also be ordered. In the model table the WR3 sits below the WR2, listed for rooms of 20 - 35 m2, and the WR1, listed for 30 - 50 m2.
Pairing
An amplifier stable into low impedances is required.
Alternatives
The Prodigio WR2 Arrabona is the next model up, with 0.45 m2 of foil, 91 dB sensitivity and a height of 1848 mm.