The Tonda is the larger of Vimberg's two floorstanding loudspeakers and the heaviest of its three models. It is built alongside the Amea and Mino in the Tidal Audio factory, and Jörn Janczak is designer and CEO of both Tidal and Vimberg. Pricing is GBP 41,000 or EUR 42,900 per pair. Each pair is built to order, with about 60 days to delivery.
Key specs that matter
Vimberg specifies a 3-way full-range loudspeaker with a 30 mm Accuton Cell ceramic tweeter, a 168 mm Accuton Cell ceramic midrange and three 190 mm Accuton Cell woofers. The standard ceramic tweeter version is also called the Tonda C. With the optional 30 mm Accuton Cell diamond tweeter it becomes the Tonda D, at GBP 8,500 extra. Nominal impedance is 4 ohms (lowest point 3.4 ohms at 100 Hz). Efficiency is 90 dB (2.83 V/1 m/1 kHz). One speaker weighs 96 kg, 110 kg packed and 142 kg in the optional ATA flight case, listed at USD 1,600 per pair. Shipping dimensions are 400 x 1700 x 640 mm.
Engineering and use context
All three woofers are a long excursion design with 3D-shaped honeycomb sandwich diaphragms made of aluminium. The ceramic midrange has a very hard and light diaphragm. Both upper drivers form a decoupled aluminium high-midrange unit, installed into a massive aluminium front plate. A dual-tune bass reflex port design is specified for lowest port noise and a selectable F3.
Its MRD cabinet is made of waterproof high-density fibre laminate with reinforcing aluminium elements for all drivers. Vimberg describes the laminate as resonance-absorbing and the aluminium as a reinforcement of the construction. The crossover uses Vimberg monopulse technology for a linear frequency response with optimised impulse response, with a topology designed for these drivers. Mundorf and Duelund components are used exclusively. Internal wiring is Mogami coaxial speaker cable. Argento pure silver binding posts have a fibre-reinforced polymer body that avoids magnetic interference with the conductor.
Beneath the cabinet, a footer milled from one block of aluminium is connected to a 5-part isolation device with a Teflon glider inlay. It gives height adjustment on hardwood floors, tiles or carpet, together with decoupling isolation gliders and 3D-shaped installation triggers. Finishes are real piano lacquer in summit white or jet black and Velvetec in Summit White, Jet Black, Slate Grey, Sonoma Orange and Amethyst, with other colours on request.
Pairing
An amplifier stable into 4 ohms is required, either an integrated or stereo power amplifier or a pair of monoblocks.
Alternatives
The Vimberg Mino is the smaller floorstanding model, with a 90 mm ceramic midrange and three 168 mm woofers.