The Theva N°3-D is the Dolby Atmos floorstanding loudspeaker of Focal's Theva range, which Focal names the reference Home Cinema model of the line. Besides its three-way front section, it carries a top-mounted driver that reflects sound waves off the ceiling for Dolby Atmos effects.
Key specs that matter
Its main section is a bass-reflex three-way floorstanding loudspeaker with two 16.5 cm (6.5 in.) Slatefiber bass drivers, a 16.5 cm Slatefiber midrange and a 25 mm (1 in.) Al/Mg inverted dome TNF tweeter. Crossover frequencies are 270 Hz and 2700 Hz. Bandwidth is 48 Hz - 28 kHz, with a low-frequency cut-off of 39 Hz (-6 dB). Sensitivity is 91 dB, impedance is 8 ohms nominal and 2.9 ohms minimum, and recommended amplifier power is 40 - 250 W. On top sits a one-way closed module with a 13 cm (5 in.) full-range driver, rated at 91 dB, 6 ohms nominal and 100 Hz - 20 kHz, with a 90 Hz cut-off. Dimensions are 101.9 x 21.2 x 38.8 cm (H x W x D), and weight with grille is 22 kg.
Engineering and use context
Focal makes the Slatefiber cone in France from recycled non-woven carbon fibres, all oriented in the same direction, and thermoplastic polymer. The Atmos driver also has a Slatefiber cone, with an Al/Mg dome, and is mounted with a directional baffle and a waveguide for localised Atmos effects.
Inside the TNF tweeter, the suspension between dome and support is made of Poron, a shape memory material, and is derived from Focal's Beryllium tweeter. According to Focal, it reduces distortion by a factor of three between 2000 Hz and 3000 Hz. A waveguide was added to the inverted dome, and horizontal frequency response stays within ±0.5 dB.
Each cabinet stands on a tilted stand for Time Alignment, with the sound focused on the listener. Its port is on the rear panel. An additional front panel carries metallized and screen-printed rings and a magnetic grille. Four spikes and four bumpers are included, and finishes are Black High Gloss, Dark Wood and Light Wood.
Pairing
An AV receiver or processor with Dolby Atmos height channels is required for the top module. An amplifier stable into low impedances is required for the main section. Matching models are the Theva N°1, Theva N°2, Theva N°3, Theva Center, Theva Surround and the SUB 600P subwoofer.
Alternatives
Focal's Theva N°3 is the three-way floorstanding speaker of the same range.