Hifiverse

Standlautsprecher - Focal THEVA N°3

Beschreibung, Bilder, technische Daten und Spezifikationen

Focal THEVA N°3
Bildquelle - (c) Focal

The Theva N°3 is a three-way bass-reflex floorstanding loudspeaker from Focal and the flagship model of the Theva range. Focal makes it in France. The range also includes the Theva N°1, the Theva N°2, the Theva N°3-D, the Theva Center and the Theva Surround. Theva replaced the Chora line and began shipping at the end of April 2023, and a pair cost USD 2,398 in the United States at launch.

Key specs that matter

Driver complement is two 165 mm Slatefiber bass units, a 165 mm Slatefiber midrange and a 25 mm Al/Mg inverted dome TNF tweeter. Crossover frequencies are 270 Hz and 2.7 kHz. Frequency response is 48 Hz - 28 kHz (±3 dB), with the low-frequency cut-off at 39 Hz (-6 dB). Sensitivity is 91 dB. Impedance is 8 ohms nominal, 2.9 ohms minimum. Recommended amplifier power is 40 - 250 W. Each speaker measures 212 x 989 x 388 mm (W x H x D) and weighs 20 kg with grille.

Engineering and use context

Focal makes the TNF tweeter in its own workshops in France. Its aluminium/magnesium inverted dome is joined to its support by a suspension of Poron, a shape-memory material. According to Focal, this suspension is derived from the company's Beryllium tweeter and reduces distortion by a factor of three between 2 kHz and 3 kHz. A waveguide is added in front of the dome, and Focal quotes a horizontal-plane frequency response within ±0.5 dB.

All three cone drivers use the Slatefiber diaphragm, which is exclusive to Focal and also made in France. It consists of recycled carbon fibres and a thermoplastic polymer. Its non-woven carbon fibres are oriented in the same direction for rigidity, damping and low mass.

On the cabinet, the reflex vent is positioned at the rear. Metallic and silk-screened rings frame the drivers on the front panel. Each speaker stands on a tilted stand that gives Time Alignment of the drivers towards the listener. Four spikes, four bumpers and a magnetic grille are included. Its connectors accept stripped cables up to 4 mm in diameter, fork terminals or banana plugs. Standard finishes are Black High Gloss, Dark Wood and Light Wood, and the Light Wood version comes with a light-coloured stand and grille.

Pairing

An amplifier stable into low impedances is required. For home cinema, the matching models are the Theva Center, the Theva Surround and the SUB 600P subwoofer.

Alternatives

The Theva N°2 is the smaller three-way floorstanding speaker in the same range.

Spezifikationen

  • Modellbezeichnung

    THEVA N°3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    48

  • Obere Grenzfrequenz +/- 3dB (Hz)

    28000

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    40 - 250

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    21.2 × 98.9 × 38.8

  • Gewicht (kg)

    20

  • Offizieller Link

Weitere Komponenten