THE VOICE is a passive floorstanding loudspeaker from Einstein Audio Components of Bochum, Germany. It started as a proposal from one of the company's partners. Einstein regarded a tall cabinet as a poor fit at first, because the larger wood surfaces of a floorstanding speaker create resonances, and it answered with a closed enclosure in tower form.
Key specs that matter
THE VOICE is a two-way design with a 30 mm (1.2 in.) waveguide tweeter and two 210 mm (8 3/4 in.) woofer/midrange drivers. Its crossover is first-order, 6 dB. Frequency response is 42 Hz - 28 kHz (-3 dB), sensitivity is 92 dB and impedance is 4 ohms. Recommended amplifier power is 6 - 200 W.
Engineering and use context
As with all other Einstein loudspeakers, the enclosure is a sealed box, and Einstein describes it as less susceptible to standing waves. Einstein searched for an 8-inch driver suited to sealed-box use and then added a second 8-inch unit to reach the output it wanted. According to the company, complex crossovers with many components allow a linear frequency response but can overload low-power amplifiers, so a phase-coherent 6 dB network was chosen. The wide usable frequency range of the tweeter allows a low crossover frequency with very low distortion.
Below the two woofers sits the tweeter, with a waveguide and a felt pad. The enclosure has a 6-degree tilt for time alignment of the tweeter with the woofers. Its cabinet is made of solid multi-layer plywood and is equipped with braces and a strut for rigidity. Final tuning of the midrange was done with long-fibre natural wool as damping material.
Pairing
An amplifier stable into 4 ohms is required. Einstein's own matching products for an analogue front end are The Recordplayer turntable, The Pick Up cartridge, The Flash tonearm cable and The Phonoamp.
Alternatives
The other Einstein floorstanding speaker is the four-way Shadow Speaker, also offered in black as the Black Shadow Speaker.