Hifiverse

Standlautsprecher - Charney Audio The Lumaca VI

Beschreibung, Bilder, technische Daten und Spezifikationen

Charney Audio The Lumaca VI
Bildquelle - (c) Charney Audio

The Lumaca VI is the smallest of three models in the Lumaca series from Charney Audio, the single-driver horn loudspeaker maker of Brian Charney in New Jersey, whose speakers are made in the USA. Charney describes the Lumaca as the statement realisation of its tractrix horn design, developed after the Concerto. The series is offered in three scale variants, VI, VII and VIII, so that the system can be matched to the space it occupies. Charney showed the Lumaca at Capital Audiofest 2025 with Voxativ AC-2.6 drivers.

Key specs that matter

Frequency response is 30 Hz - 22 kHz. Sensitivity is 107 dB, and nominal impedance is 8 ohms. The tractrix expansion is 2845 mm long. Each speaker measures 1905 x 559 x 559 mm (H x W x D) and weighs 24.9 kg. A pair costs USD 61,000 with Voxativ AC-2.6 drivers or USD 66,000 with AER bd-3b drivers.

Engineering and use context

According to Charney, the tractrix expansion is held to within thousandths of an inch throughout the whole structure. It is carried through as a continuous surface, with no corners or flat interruptions along the path of the wavefront. Charney states that the enclosure remains mechanically quiet under load.

In the Lumaca VI the bass exits through the base of the cabinet over 360 degrees. The two larger models use longer expansions, and in the Lumaca VIII the horn exit is directed rearward at 45 degrees.

Each Lumaca accepts a range of 203 mm wideband drivers, with no crossover, and Voxativ and AER drivers are both fully supported. Driver choice does not alter the behaviour of the horn, and a dedicated driver guide describes each option and its interaction with the enclosure. Charney rates the Voxativ AC-2.6 at 10.3 ohms, a Qts of 0.46 and 93 dB at 60 Hz or 98 dB at 3 kHz (1 W/1 m). Its power handling is 50 W nominal and 100 W music power, outer diameter is 190 mm, mounting depth is 70 mm, and weight is 2.4 kg. The AER bd driver has a 16 ohm impedance, a 20 Hz - 80 kHz response and 100 W nominal or 300 W peak power handling.

Pairing

A low-power amplifier, including a single-ended 300B tube design, is sufficient. The matching amplifier from the same maker is the Charney Kit-1 300B. No subwoofer or external crossover is required.

Alternatives

The Charney Audio Lumaca VII is the next model in the series, with a 3200 mm tractrix expansion and a response down to 20 Hz.

Spezifikationen

  • Modellbezeichnung

    The Lumaca VI

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    190.5 x 55.9 x 55.9

  • Gewicht (kg)

    24.95

  • Offizieller Link