Hifiverse

Standlautsprecher - Virtual HiFi Supernova

Beschreibung, Bilder, technische Daten und Spezifikationen

Virtual HiFi Supernova
Bildquelle - (c) Virtual HiFi

The Supernova is a passive three-way open-baffle floorstanding speaker from Virtual HiFi of Poland, the company of Grzegorz Rulka, who co-founded Cube Audio and Qualio Audio and has designed full-range drivers, crossovers and cabinets for twenty years. Virtual HiFi lists it as No. 01 of its Reference Series and as the only floorstanding speaker in a catalogue that otherwise holds two monitors, cables, isolation feet and op-amp upgrades. Every pair is built to order, with about 100 hours of 3D printing, 20 hours of assembly and 100 hours of testing, and the usual lead time is four to six weeks.

Key specs that matter

The driver complement of each speaker is two 15-inch SB Audience Nero neodymium woofers, an SB Acoustics Satori midrange with a TeXtreme carbon-fibre cone and a large Mundorf AMT tweeter, a version Mundorf does not normally sell and supplies to special order. Frequency response is 25 Hz to 22 kHz, sensitivity is about 90 dB at 2.83 V and 1 m, and impedance is 4 ohm nominal with a 2.9 ohm minimum. The speaker measures 42 x 21 x 129 cm (W x D x H), or 50 x 47 cm in footprint on its platform, and weighs 56 kg. Ten colours are offered, among them Original Black, Original White, Ruby Red, Sapphire Blue, Racing Green and Cream.

Engineering and use context

With no enclosure behind them, the drivers send energy forward and backward alike, and the bass behaves as a dipole. The baffle is a bonded sandwich of 3 mm high-strength steel, a 2 mm elastomer layer and another 3 mm of steel. When a driver pushes on it, the two plates flex by different amounts, the elastomer shears and the movement turns into heat - constrained layer damping, which Virtual HiFi says leaves the 8 mm panel stiffer than 28 mm MDF. The rear stays open, so the steel frame, motors and wiring are in view. Midrange and AMT sit in waveguides designed and 3D-printed in house. The crossover combines Jantzen Amber Z-Cap and Mundorf capacitors, Mundorf MResist resistors, ClarityCap film capacitors, Duelund tinned-copper wire and air-core inductors, wired point to point. Silicone wheels and printed TPU Vibron footers come in the box, and each speaker travels in its own 3 mm steel transport cart.

Pairing

Virtual HiFi designs the Supernova for rooms of 25 to 100 m2 and does not consider a subwoofer necessary. It names solid-state amplifiers from 100 W into 4 ohm, or push-pull tube amplifiers with KT88, KT120 or KT150 output tubes, and says class A, AB and D designs all suit, with current reserve preferred given how far the impedance falls. The company's own Vermillion speaker cables complete the chain.

Alternatives

Virtual HiFi makes no other floorstanding speaker, so the Supernova has no alternative of the same type within the brand.

Spezifikationen

  • Modellbezeichnung

    Supernova

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link