Hifiverse

Standlautsprecher - Tangent Acoustics Spectrum II X6

Beschreibung, Bilder, technische Daten und Spezifikationen

Tangent Acoustics Spectrum II X6
Bildquelle - (c) Tangent Acoustics

The Spectrum II X6 is a passive bass-reflex floorstanding loudspeaker from the Danish brand Tangent. It is the floorstanding model of the Spectrum II series, which also includes the X4 and X5 bookshelf speakers, the XC and XLCR centre speakers, the XATM Atmos module and the XSW8 active subwoofer. Tangent uses its 2.5-way ZTL technology in this model. Black and White finishes are offered.

Key specs that matter

Type is 2.5-way bass reflex. Drive units are a 1-inch dome tweeter and two 5-inch cellulose pulp mid-woofers. Crossover frequencies are 1,800 Hz and 2,900 Hz, with 12 dB per octave slopes. Frequency response is 50 Hz - 20 kHz (±3 dB). Sensitivity is 90 dB (1 W/1 m) and nominal impedance is 6 ohms. Power handling is 100 W RMS (150 W peak), and the recommended amplifier power is 20 - 150 W. Dimensions are 166 x 900 x 268 mm (W x H x D), and net weight is 12 kg.

Engineering and use context

With two crossover points, the X6 differs from the smaller models of the range, which are plain two-way designs with a single crossover. In the X4 bookshelf speaker one 4-inch cellulose pulp mid-woofer and the same 1-inch dome tweeter are crossed over at 2,800 Hz, and its response is rated from 65 Hz. Against the X4, the X6 also has 3 dB more sensitivity and twice the RMS power rating.

All passive models of the series share a 6 ohm nominal impedance and cellulose pulp cones. On the XC centre speaker two 4-inch mid-woofers sit beside the tweeter with a crossover at 2,300 Hz. A sealed coaxial 2-way design with a 3/4-inch dome tweeter and a 5-inch cellulose pulp mid-woofer is used in the XATM Atmos module, whose 166 x 268 mm footprint is the same as that of the X6. The XSW8 is a sealed active subwoofer with an 8-inch cellulose pulp woofer, a 25 - 200 Hz range, 100 W RMS of amplification and a 0/180 degree phase switch.

Pairing

An amplifier rated for 6 ohm loads is required. The matching centre speaker is the Spectrum II XC, and the matching subwoofer is the Spectrum II XSW8. Height channels for an Atmos system come from the XATM module.

Alternatives

The Spectrum X6 BT Phono is Tangent's active floorstanding model, with a built-in amplifier, Bluetooth and a phono input.

Spezifikationen