Hifiverse

Standlautsprecher - Thorens Soundwall HP 600

Beschreibung, Bilder, technische Daten und Spezifikationen

Thorens Soundwall HP 600
Bildquelle - (c) Thorens

The SoundWall HP 600 is a dipole floorstanding loudspeaker from Thorens. More than 40 years ago Thorens built the SoundWall HP 360 and HP 380, loudspeakers that radiate the entire audio range as dipoles, and the HP 600 is a redevelopment of that concept. Like its predecessors it radiates equally strongly to the front and to the rear. It was developed by Joachim Gerhard, who has designed loudspeakers for Audio Physic and Suesskind.

Key specs that matter

This is a three-way loudspeaker based on the open baffle principle. Each speaker carries twelve 15 cm woofers, two midrange drivers and two tweeters. Frequency response is 30 - 28,000 Hz. Sound pressure level is 95 dB (1 W/1 m) and impedance is 8 ohms (DIN). Nominal power handling is 300 W (DIN). Dimensions are 60 x 125 x 16 cm (W x H x D), and weight is 40 kg.

Engineering and use context

All woofers and midrange drivers are mounted freely in the ultra-flat sound wall, with no enclosure or damping material behind them. The original SoundWall used 15 woofers per stereo channel. In the HP 600 there are twelve slightly larger ones per side, and Thorens uses their wiring to obtain high efficiency and bass extension down to 40 Hz. Across a pair, the combined surface area of the 24 woofers allows high undistorted sound levels.

In the upper part of the sound panel the two midrange drivers surround the two tweeters in a D'Appolito arrangement. Both tweeters are mounted back-to-back to maintain the dipole character throughout the frequency range. Thorens states that the concentric D'Appolito layout gives symmetrical focusing of the mid-high frequency energy. Level of the rear tweeter is adjustable.

According to Thorens, the dipole characteristic interacts more predictably with the acoustics of the listening room across the entire frequency range, especially in larger rooms. Its wing profile has a very shallow depth and combines solid aluminium with fine wood veneers.

Pairing

A high-power amplifier is not required. Thorens specifies it for practically any transistor amplifier and most tube amplifiers.

Alternatives

Thorens has no other floorstanding loudspeaker in its current range.

Spezifikationen

  • Modellbezeichnung

    Soundwall HP 600

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    28000

  • Empfindlichkeit (dB at 1 W/1m)

    95

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    up to 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    60 x 125 x 16

  • Gewicht (kg)

    40

  • Offizieller Link