Hifiverse

Standlautsprecher - Duntech SENATOR

Beschreibung, Bilder, technische Daten und Spezifikationen

Duntech SENATOR
Bildquelle - (c) Duntech

The Senator is a two-way floorstanding loudspeaker from Duntech Audio of Lugarno, New South Wales, Australia. Duntech calls it the second model in its new line-up of latest designs, alongside the Princess, Marquis and Sovereign floorstanding speakers and the DSM-15. It was designed to a set of rules that the company calls the Duntech design directives.

Key specs that matter

Frequency response is 45 Hz - 35 kHz (±1.5 dB), measured at 3.5 m on the tweeter axis, with the -3 dB point at 42 Hz. Efficiency is 90 dB SPL at 2.83 V/1 m, and nominal impedance is 4 ohms. Peak power rating is 500 W for 10 µs, and recommended amplifier power is a minimum of 100 W RMS per channel. Propagation time error, Duntech's pulse coherency factor, is less than 10 µs at 3.5 m on the tweeter axis. Drive units are two 180 mm bass drivers and one 25 mm tweeter, with a first-order crossover. Each speaker measures 1,345 x 360 x 470 mm (H x W x D) and weighs 54 kg packed.

Engineering and use context

Under the first of these directives, the cabinet has to be a sealed box. Duntech states that only a sealed box allows a pulse coherent speaker, in which all drive units act and react in the same direction at the same instant.

Time alignment is the second requirement, with the acoustic centres of all drive units aligned on one plane. Issues caused by mechanical time alignment are addressed with felt, a solution patented by Duntech for many years.

To minimise microphonics, the crossover unit is located outside the loudspeaker cabinet. Every pair goes through an extensive testing procedure to obtain a precisely matched stereo pair, and each speaker is re-measured before approval for packing and delivery. Cardas CPBP binding posts are used for the input, and the finish is Pommele Bubinga.

Pairing

An amplifier stable into 4 ohms is required. The Cardas terminals accept spade connections only, and the Senator does not support bi-wiring.

Alternatives

The Princess is another Duntech floorstanding loudspeaker, with two 250 mm bass drivers, two 90 mm midrange drivers and a 25 mm tweeter, also crossed over at first order.

Spezifikationen

  • Modellbezeichnung

    SENATOR

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    >100

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    134.5 × 36 × 47

  • Gewicht (kg)

    54

  • Offizieller Link

Weitere Komponenten