Hifiverse

Standlautsprecher - ATC SCM40A

Beschreibung, Bilder, technische Daten und Spezifikationen

ATC SCM40A
Bildquelle - (c) ATC

The SCM40A is the three-way active floorstanding speaker of the ATC Entry Series and the powered counterpart of the passive SCM40. ATC, the Acoustic Transducer Company, designs and builds its drive units in-house, and this model adds an on-board tri-amplifier to the SCM40 cabinet. The UK price was GBP 7,750 per pair.

Key specs that matter

Drivers are a 25 mm dual suspension soft dome tweeter, a 75 mm ATC Soft Dome midrange and a 164 mm short coil bass unit, with crossover frequencies at 380 Hz and 3.5 kHz. Amplifier output is 150 W LF, 60 W MF and 32 W HF, 242 W in total. Frequency response is 48 Hz - 22 kHz (-6 dB), matched response is ±0.5 dB and maximum SPL is 112 dB. Dispersion is ±80° horizontal and ±10° vertical, coherent. Input is an XLR connector with 1 V sensitivity. Each cabinet measures 980 x 370 x 344 mm (H x W x D) including foot plinth and amplifier, spikes add 25 mm to the height and the grille 34 mm to the depth. Weight is 36 kg.

Engineering and use context

ATC designed and built a new tweeter for the Entry Series and mounts it in a precision alloy waveguide. Its dual suspension, according to ATC, suppresses diaphragm rocking modes even at high output levels. ATC developed its Soft Dome midrange technology in 1976. All three drive units have massive optimised motor assemblies, and the bass unit uses a short edgewise wound voice coil operating in a long magnetic gap, with no ferrofluid. ATC voice coils are edgewise wound OFHC copper ribbon in a precision machined gap, and a hole through the pole vents air from under the dust cap.

Amplification is an on-board grounded source Class A/B tri-amplifier. Active filters are 4th order, critically damped, with phase compensation. Overload protection is active FET momentary gain reduction, and DC fault protection with a thermal trip is indicated by an LED on the rear panel, next to a push-in power switch. Four M8 x 1.25 mm spikes come with each cabinet. Finishes are cherry or black ash veneer and satin black or satin white paint, and the warranty covers 6 years.

Pairing

A preamplifier, streamer or DAC with a variable balanced output is required. Each cabinet needs a mains connection and one XLR interconnect, with no power amplifier or speaker cable. ATC lists the CDA2 CD player, preamplifier and DAC and the CA2 preamplifier as partner electronics.

Alternatives

The ATC SCM19A is the two-way active floorstanding speaker of the same Entry Series, with a 150 mm SL mid and bass driver and 182 W of on-board power.

Spezifikationen

  • Modellbezeichnung

    SCM40A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    48 (-6dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000 (-6dB)

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    32 + 60 + 150

  • Größe (sm)

    98.0 x 37.0 x 34.4

  • Gewicht (kg)

    36

  • Offizieller Link

Weitere Komponenten