Hifiverse

Standlautsprecher - ATC SCM200ASLT

Beschreibung, Bilder, technische Daten und Spezifikationen

ATC SCM200ASLT
Bildquelle - (c) ATC

The SCM200ASLT is a three-way active tower in the ATC Tower Series, placed between the SCM150ASLT and the SCM300ASLT and built at Aston Down near Stroud. A passive SCM200PSLT is offered as well. Its amplification is not housed in the cabinet - each speaker is driven by a separate rack-mount ATC P4 amplifier with four channels and 850 W in total.

Key specs that matter

Two 314 mm SL bass drivers, a 75 mm Super Dome midrange and a 25 mm dual-suspension S-Spec soft dome tweeter make up the driver complement. Crossover points are 380 Hz and 3.5 kHz. Amplitude linearity is 60 Hz - 12 kHz (±2 dB), and cut-off frequencies are 32 Hz and 20 kHz (-6 dB, free-standing). Maximum continuous SPL at 1 m is 118 dB, or 117 dB for the passive version. P4 output is 275 W for each bass driver, 200 W for the midrange and 100 W for the tweeter. Input is a female XLR with 2 V input sensitivity and a balanced input impedance above 10 kohms. Dispersion is ±80° horizontal and ±10° vertical, coherent. Each cabinet measures 1586 x 398 x 535 mm (H x W x D).

Engineering and use context

ATC describes the P4 as a 4-way grounded source amplifier. It contains the three-way active filters and four power amplifiers - one for each bass driver, one for the midrange and one for the tweeter. Active filters are fourth-order critically damped. Overload protection combines active FET momentary gain reduction with thermal tweeter protection. According to ATC's P4 manual, one P4 is needed per speaker and it can be located remotely from the cabinet, linked by a single custom eight-way speaker cable. Cables of 5 m are standard and lengths up to 10 m are available. Inside the 5U rack chassis the P4 is cooled by forced ventilation, and it weighs 40 kg. A 5-pin interface socket allows active and standby control.

In the passive SCM200PSLT the same drivers and cabinet work with second-order critically damped passive filters and tri-wire binding posts, at 91 dB sensitivity and 8 ohms nominal impedance. Standard finishes are cherry, walnut, oak and black ash veneer or satin black and satin white paint. Rosewood, pippy oak, burr magnolia and piano gloss carry a surcharge. ATC gives a 6-year warranty.

Pairing

A preamplifier with a balanced XLR output is required. Two P4 units are needed for a stereo pair. ATC lists the CA2 and SCA2 preamplifiers and the CDA2 CD player with preamplifier and DAC as partner electronics.

Alternatives

The SCM300ASLT is the larger active tower of the series, using the same P4 amplifier with two 375 mm SL bass drivers.

Spezifikationen

  • Modellbezeichnung

    SCM200ASLT

  • Untere Grenzfrequenz +/- 3dB (Hz)

    32 (-6dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000 (-6dB)

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    100 + 200 + (275 + 275)

  • Größe (sm)

    158.6 x 39.8 x 53.5

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten