Hifiverse

Standlautsprecher - Technics SB-G90M2

Beschreibung, Bilder, technische Daten und Spezifikationen

Technics SB-G90M2
Bildquelle - (c) Technics

The SB-G90M2 is a passive floorstanding loudspeaker from Technics and the successor to the SB-G90. Compared with that model it has a newly developed two-way coaxial unit, a further optimised Balanced Driver Mounting Architecture and bi-wiring terminals, which Technics added in response to customer requests. It is sold per piece, at USD 3,999.99 in the USA and EUR 2,699 in Germany, finished in black.

Key specs that matter

This is a three-way, four-driver bass reflex design. Two 160 mm cone woofers sit below a coaxial unit that combines a 160 mm midrange cone with a 25 mm dome tweeter, and the crossover frequencies are 500 Hz and 3.4 kHz. Frequency range is 33 Hz - 90 kHz (-10 dB). Nominal impedance is 4 ohms, with a sensitivity of 86 dB (2.83 V/1 m) or 83 dB (1 W/1 m). Input power is 100 W rated and 200 W maximum (IEC), and recommended amplifier power is 40 - 200 W. Each speaker measures 292 x 1,114 x 366 mm (W x H x D) including spikes and weighs approx. 35 kg.

Engineering and use context

Technics uses the coaxial layout to approximate a point sound source. In front of the tweeter is a Linear Phase Plug whose tip is made of high-modulus, high-density brass, so that it does not vibrate together with the midrange unit. Around it, the Smooth Flow Diaphragm of the midrange has a shallow shape with a smooth edge to reduce sound reflections. CAE analysis was used to optimise the drivers, the enclosure structure and the vent holes.

Both woofers are long-stroke units whose magnetic circuit has a double magnet, a long voice coil and a copper ring. At the bottom of the woofer cabinet is the patented Standing Wave Termination Structure, a sound path with sound-absorbing material installed in it, so less absorbing material is needed in the enclosure. Inside, the speaker mount baffle is combined with a lateral reinforcement board into a cross structure against unwanted resonance.

With Advanced BDMA, vibration from the drivers can escape to the ground, and the coaxial unit's mount baffle is separated from the woofer mount baffle. Spikes, spike shoes, spacers, base plates, rubber feet, short wires, a speaker net and a cleaning cloth are included.

Pairing

An amplifier stable into 4 ohms is required. The bi-wiring terminals allow the woofers and the coaxial unit to be driven by separate amplifiers. For single-amplifier use, the supplied short wires link the two terminal pairs.

Alternatives

The SB-R1 from the Technics Reference Class is a larger floorstanding speaker with four woofers and a flat coaxial midrange and tweeter unit.

Spezifikationen

  • Modellbezeichnung

    SB-G90M2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    33

  • Obere Grenzfrequenz +/- 3dB (Hz)

    90 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    40 - 200

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    292 × 1114 × 366

  • Gewicht (kg)

    35

  • Offizieller Link