The S7t is a floorstanding loudspeaker from Perlisten Audio of Verona, Wisconsin, and the company calls it its most advanced speaker to date and the flagship of the range. It belongs to the S-Series, which Perlisten describes as the first loudspeakers certified for THX Dominus, the highest THX rating. All S-Series models share the same DPC-Array for the mid and high frequencies.
Key specs that matter
Design is 4-way, configurable as bass reflex or acoustic suspension. The DPC-Array has a 28 mm beryllium dome between two 28 mm TexTreme TPCD domes, and bass comes from four 180 mm TexTreme TPCD woofers. Sensitivity is 92.2 dB (2.83 V/1 m). Impedance is 4 ohms nominal, 3.2 ohms minimum. Frequency response is 80 Hz - 20 kHz (±1.5 dB). At -10 dB the range is 22 Hz - 37 kHz in bass reflex mode and 32 Hz - 37 kHz as acoustic suspension, and typical in-room bass extension is 16 Hz and 23 Hz respectively. Recommended amplifier power is 100 - 600 W RMS, and SPL capability is 117 dB peak (100 Hz - 20 kHz). Each speaker measures 1295 x 240 x 400 mm (H x W x D) and weighs 55.7 kg.
Engineering and use context
The DPC-Array is a patent-pending tweeter and waveguide array. Perlisten developed it with companies in the USA and Sweden, using Comsol acoustic modelling over 18 months of simulations and prototyping, and its engineers developed all transducers themselves. Beryllium is used for its strength and damping, without the typical harsh break-up modes.
Flanking the beryllium tweeter, the two TPCD carbon fibre midrange domes allow a crossover point more than an octave lower than typical domes, without the beaming of larger diaphragms. A waveguide lens sets the directional characteristics of the whole array and is shaped to optimise early reflections and sound power.
TPCD means thin-ply carbon diaphragm. Its TexTreme carbon fibre is built up from multiple stacked layers and is 30% lighter than standard carbon fibre of the same thickness, and Perlisten states that the weave distributes break-up modes without sharp response peaks. Standard finishes are piano black and gloss white, wooden special editions come in cherry natural, black cherry natural, ebony natural and ebony high gloss, and custom painted versions are available.
Pairing
An amplifier stable into low impedances with strong current delivery is required, such as a solid-state power amplifier or AV receiver. In a home cinema, the other S-Series models use the same DPC-Array.
Alternatives
The Perlisten S5t is another tower speaker in the S-Series and uses the same DPC-Array.