Hifiverse

Standlautsprecher - ProAc Response DT8

Beschreibung, Bilder, technische Daten und Spezifikationen

ProAc Response DT8
Bildquelle - (c) ProAc

The Response DT8 is a slim ported floorstanding loudspeaker from ProAc, the British maker of the Response range, and the company lists it as its entry-level floorstanding speaker. It stands 978 mm tall on its spikes with a footprint of only 193 mm across and 229 mm front to back, and each cabinet weighs 26 kg. The idea behind it is to mix drive unit materials, because ProAc's research into diaphragms found that different materials do best in different parts of the frequency range.

Key specs that matter

Two 6.5-inch bass and midrange drivers work in tandem, each with its own cone material. The lower one carries a Pagina Mica pulp cone with an open weave dust cap and is aimed at bass output, while the second has a polypropylene cone with a soft polypropylene dust cap and looks after the midrange. Treble comes from a ProAc 1-inch silk dome tweeter set in an offset position between the two larger units. Nominal impedance is 4 ohms and sensitivity is 90 dB linear for 1 W at 1 m. Response extends from 28 Hz to 30 kHz, and ProAc recommends amplifiers rated from 20 to 180 W.

Engineering and use context

Stewart Tyler designed the crossover specifically to join the two cone types, and their working ranges are deliberately overlapped so the hand-over between them is smooth. The network is built on glass fibre board with high quality parts and wired with multistrand copper cable. The terminal panel supports both bi-wiring and bi-amping. Bass loading is handled by vents on the cabinet flanks instead of a port on the front or rear panel, which keeps the narrow baffle clear for the three drive units. An acoustically transparent crimplene grille covers the front, and some finishes come with magnetic grilles instead. Standard veneers are walnut, cherry, natural oak, mahogany and black ash, with a silk white paint option, while liquidambar, rosewood and ebony cost extra. The narrow width suits a living space of around 20 m2 where a broad cabinet would dominate.

Pairing

The DT8 wants an amplifier happy to deliver current into low impedances. The high sensitivity lets modest integrated amplifiers near the bottom of the recommended bracket reach usable levels, while the split terminals let an owner with two stereo power amplifiers drive the bass section and the tweeter on separate channels.

Alternatives

The ProAc Response D20R is a two-way floorstanding speaker of the same height that uses a single 165 mm glass fibre bass unit with a ribbon tweeter and presents an 8 ohm load.

Spezifikationen

  • Modellbezeichnung

    Response DT8

  • Untere Grenzfrequenz +/- 3dB (Hz)

    28

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    20 - 180

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    97.8 × 19.3 × 22.9

  • Gewicht (kg)

    26

  • Offizieller Link