Hifiverse

Standlautsprecher - Canton Reference 3

Beschreibung, Bilder, technische Daten und Spezifikationen

Canton Reference 3
Bildquelle - (c) Canton

The Reference 3 is a high-end floorstanding loudspeaker from Canton, the German company that develops and manufactures the Reference series in its factory in Weilrod in the Taunus region. It belongs to the 2023 Reference line, which also includes the Reference 1, 2, 5 and 7 floorstanding speakers, the Reference 9 compact speaker, a centre speaker and a subwoofer. Canton lists it at EUR 6,600 per piece, and the US price at launch was USD 19,500 per pair in black or white and USD 21,500 in walnut. Reference passive loudspeakers carry a 10-year warranty.

Key specs that matter

Principle is 3-way, bass reflex. Drivers are two 192 mm BCT woofers, one 174 mm BCT midrange and one 25 mm BC tweeter. Transmission range is 20 Hz - 40 kHz, with transition frequencies at 180 Hz and 3 kHz. Efficiency is 88 dB (2.83 V/1 m) and impedance is 4 - 8 ohms. Nominal and music load capacity are 300 W and 500 W. Dimensions are 32 x 109 x 49 cm (W x H x D) with the base plate and 29 x 46 cm in width and depth without it, and weight is 42 kg. Finishes are White Satin, Black Piano and Walnut.

Engineering and use context

BCT stands for Black Ceramic Tungsten. In this diaphragm 25 percent of an aluminium cone is converted into a ceramic structure on both sides and then refined with tungsten and other metal particles, and the surfaces turn black in the process. Its midrange cone uses TCC technology, a shape-optimised diaphragm with three different radii. All drivers are clamped in triple-folded wave surrounds, and the baskets are fibreglass-reinforced polycarbonate. Canton's BC tweeter has a black aluminium-oxide ceramic dome behind an asymmetrical wave guide.

Each cabinet is made of multi-layer laminate with round baffles milled on a 5-axis CNC machine, curved side panels and computer-optimised internal stiffening. Twelve layers of lacquer are applied for the Black Piano finish. The base forms the Bass Guide, which radiates low frequencies to the front and rear of the cabinet in equal parts. Asymmetrical POM cover rings act as waveguides and hold the drivers flush with the baffle without visible screws.

In the crossover Canton uses air coils, low-loss metal oxide resistors and film capacitors. Internal wiring is CantoLink 400 cable. Four magnetic fabric covers are supplied.

Pairing

An amplifier rated for 4 ohm loads is required. The WBT nextgen binding posts allow single-wiring, bi-wiring or bi-amping, and hard-gold-plated copper bridges are included for single-wire use.

Alternatives

The Canton Reference 2 is the larger floorstanding speaker of the same series, with two 219 mm BCT woofers.

Spezifikationen

Weitere Komponenten