Hifiverse

Standlautsprecher - Russell K Red 120

Beschreibung, Bilder, technische Daten und Spezifikationen

Russell K Red 120
Bildquelle - (c) Russell K

The Red 120 is a floorstanding loudspeaker in the Red series from Russell K, the loudspeaker company of designer Russell Kauffman, with production in the UK and Poland. Russell K introduced it as the latest addition to the family, and its cabinet is only 190 mm deep. Finishes are walnut, oak with a black baffle, black, piano black and piano white.

Key specs that matter

Drive units are a 25 mm soft dome tweeter and two 5-inch bass units with impregnated paper cones and a curved, optimised acoustic profile, one working as the bass/mid driver and one as the sub-bass driver in a 2.5-way layout. The sub-bass driver starts to roll off at 80 Hz at 6 dB/octave, and the bass/mid crossover is at 2,200 Hz nominal, 12 dB/octave. In-room frequency response is 25 Hz - 22 kHz (room dependent). Sensitivity is 86 dB (1 W/1 m). Port tuning is 24 Hz. Height is 860 mm (910 mm including plinth, base and spikes), width 200 mm and depth 190 mm.

Engineering and use context

Russell K builds a totally undamped cabinet, with 16 mm MDF on all sides apart from the 19 mm front baffle. Three acoustic loading bracing shelves with multiple apertures are mounted below the tweeter, the bass/mid driver and the sub-bass driver. A fourth bracing shelf near the bottom of the enclosure contains an internal port. This port vents into a small chamber with a second reflex port, and the two are tuned as a system.

Each bass unit has a high-power ferrite magnet driving a 25 mm voice coil on an aluminium former, and the drive units use a Faraday distortion-cancelling copper ring.

All drivers are connected in positive phase, and each has only one component in its signal path. The crossover is phase-optimised through the crossover region. Tweeter attenuation is by a misaligned Zobel network instead of a conventional L-pad. In the sub-bass path sits an enclosed-field iron core inductor, and the bass/mid path uses an enclosed-field ferrite core inductor. According to Russell K, these inductors combine high power handling without saturation, very low DCR and almost no stray magnetic field.

Pairing

An amplifier of medium to high power is required. The plinth, base and spikes are part of the speaker, and no stand is needed.

Alternatives

The Red 120Se is the upgraded version in the same cabinet, with a new tweeter with a metal faceplate, a bass/mid crossover at 1,800 Hz and system tuning to 21 Hz.

Spezifikationen

  • Modellbezeichnung

    Red 120

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    91.0 x 20.0 x 19.0

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten