Hifiverse

Standlautsprecher - Rogers PM510 S3

Beschreibung, Bilder, technische Daten und Spezifikationen

Rogers PM510 S3
Bildquelle - (c) Rogers

The PM510 S3 is a large two-way monitor loudspeaker from Rogers of the UK, announced on 11 May 2026. Its predecessor, the PM510 of the 1980s, is a passive loudspeaker derived from the BBC LS5/8 Grade One active studio monitor, and the S3 keeps the same BBC-specified drive unit configuration. Rogers lists the S3 for professional monitoring and for larger domestic rooms. A pair costs GBP 17,999 including VAT in the UK and about EUR 18,000 in Europe.

Key specs that matter

Frequency response is 45 Hz - 20 kHz (±3 dB). Sensitivity is 93 dB (3.87 V/1 m) and nominal impedance is 15 ohms. Power handling is 250 W RMS, with a maximum SPL of 116 dBA at 1 m. A 305 mm woofer with a lightweight PVC cone is made in the UK by VOLT Loudspeakers to Rogers design specification. Treble is covered by a 34 mm silk dome tweeter, with the crossover point at 2.6 kHz. Bass loading is reflex, tuned to 35 Hz, in an internal volume of 114 litres. Each speaker measures 760 x 460 x 400 mm (H x W x D) and weighs 32 kg.

Engineering and use context

On the woofer, a twin rear suspension minimises high transient distortion and an extended pole with a flux control ring lowers modulation distortion. Its voice coil is low-mass copper-clad aluminium. The tweeter has a phase correction plate and a single-layer voice coil wound with the same low-mass copper-clad aluminium wire.

Both drive units are connected through an 18-element crossover network with third-order filters, 18 dB per octave, on woofer and tweeter. It uses high-power ferrite-cored inductors, high-voltage film capacitors and screened toroid chokes.

According to Rogers, the cabinet is built to the original BBC LS5/8 specification, a thin-wall damped enclosure in which relatively thin panels and applied damping materials control resonances. Cabinet panels are 12 mm Baltic birch plywood, and the front baffle is also Baltic birch plywood. Real wood veneer in Amazaque or Olive Ash is standard, high gloss is an extra-cost option, and the front grille is Tygan. For the S3, the design was re-engineered to modern manufacturing standards, with changes in materials, precision assembly and quality control.

Pairing

The WBT 0705 CU terminals allow bi-wiring. Dedicated Rogers stands are recommended and sold separately. The Rogers range also includes the E20A/ii integrated tube amplifier.

Alternatives

The LS5/9 Classic is the smaller two-way BBC-derived monitor in the Rogers range.

Spezifikationen

  • Modellbezeichnung

    PM510 S3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    45

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    93

  • Impedanz (Ohms)

    15

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    76.0 x 46.0 x 40.0

  • Gewicht (kg)

    32

  • Offizieller Link