Hifiverse

Standlautsprecher - Avalon Acoustics PM3.2

Beschreibung, Bilder, technische Daten und Spezifikationen

Avalon Acoustics PM3.2
Bildquelle - (c) Avalon Acoustics

The PM3.2 is a floorstanding loudspeaker in the Precision Monitor series of Avalon Acoustics and the successor to the PM3. Its network topologies are derived from the Signature Series transducers. According to Avalon, it reaches a standard of low-frequency reproduction not attained before in a loudspeaker of this size.

Key specs that matter

Its driver complement is a 1 in. convex beryllium dome tweeter with a neodymium magnet, a 3.5 in. cone midrange with a high-BL neodymium magnet and two 9 in. composite woofers with a low-Q magnetic structure. Frequency response is 20 Hz - 50 kHz. Sensitivity is 90 dB, and impedance is 4 ohms nominal. Recommended amplifier power is 25 - 400 W. Connection is by two-position binding posts. Each speaker measures 46 x 11 x 17 in. (H x W x D) and weighs 105 lb (48 kg).

Engineering and use context

Below 200 Hz the impedance is flat, so the driving amplifier sees a non-reactive load with no back EMF. Loading is entirely resistive and finite from 10 Hz to 250 kHz.

Crossover circuitry is hard-wired with surface-only conductors, without printed-circuit boards. Proprietary all-phase crossover topologies are used, together with control of magnetic field interaction in the crossover. Each driver is individually tested and matched. Stored energy elimination (SEE) technology is applied to the drivers, and the diaphragms are made of lightweight materials with low energy storage. Wavefront generation is purely pistonic, with a wide, smooth polar response.

Its cabinet is built with Avalon's proprietary Silent Inert Cabinet material and process. Compared with the PM3, the driver complement has changed - the earlier model used a 1 in. concave carbon/glass tweeter, a 3.5 in. concave ceramic dome midrange and two 9 in. Nomex/Kevlar composite cone woofers and weighed 114 lb (52 kg) per speaker.

Standard finishes are Birdseye Maple and Polychrome. Curly Maple, Quilted Cherry and Figured Walnut are optional finishes at extra cost, and a deep gloss lacquer finish is available on a custom basis.

Pairing

An amplifier stable into 4 ohms is required. According to Avalon, the impedance characteristic allows interface with any amplifier.

Alternatives

The PM2.2 is the model below the PM3.2 in Avalon's Precision Monitor series.

Spezifikationen

  • Modellbezeichnung

    PM3.2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    50 000

  • Empfindlichkeit (dB at 1 W/1m)

    90

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    25 - 400

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    125 × 30 × 43

  • Gewicht (kg)

    48

  • Offizieller Link