The genuin audio neo is a fully active, DSP-controlled three-way floorstanding loudspeaker from Germany and the flagship of the genuin audio speaker range. Its compact version is the ava bookshelf model, with the same width and depth and half the height.
Key specs that matter
Its coaxial driver combines a 165 mm midrange with a 25 mm tweeter. On the side panel sits a 305 mm long-excursion woofer with a 76 mm voice coil and triple aluminium demodulation rings. Crossover frequencies are 180 Hz and 2 kHz, plus a 20 Hz high-pass filter, and the lower cut-off is 27 Hz (-6 dB). A 32-bit DSP with linear-phase FIR filter design controls the system. Amplification is a four-channel UMAC Class D module rated at 1,000 W maximum. Inputs are one balanced XLR analogue input and one AES/EBU digital input on XLR. Each cabinet measures 1,122 x 257 x 485 mm (without spikes) and weighs 47 kg.
Engineering and use context
In the neo the DSP replaces a passive crossover and allocates the woofer, midrange and tweeter to their operating ranges. Alongside IIR filtering it uses performance-data-based linear-phase FIR filtering, refined by the development team since the 1980s. Every driver is tested, and the DSP is programmed individually from those results so that all frequency components of the signal have a constant propagation speed. genuin audio gives a linear phase response over 60 Hz - 20 kHz and a beam width of about 90 degrees from the digitally filtered coaxial driver.
Drivers come from the professional sector, and the woofer withstands up to 1,200 W. A Look-Ahead analysis in the DSP prevents overload of drivers and power amplifiers. Two channels of the amplifier module work in bridged mode for the woofer alone, while the midrange and tweeter of the coaxial driver each have their own channel. No cooling fan is used.
For analogue sources the 24-bit stereo converter is patched internally as a single dual-range AD converter with 128 dB dynamic range. With a digital source the data stay digital until they are allocated to the individual amplifier channels. Cabinet walls are MDF boards 19-54 mm thick, grooved and internally ribbed, and a flow-optimised bass reflex tunnel sits on the back. A 3D edge geometry of the front section is diffraction-optimised for the mid-high range.
Pairing
A source or preamplifier with a balanced XLR output or an AES/EBU digital output is required. No external power amplifier is needed. The matching digital source is the genuin audio tars music server, and genuin audio's next is the preamplifier designed for its active speakers.
Alternatives
The alex is genuin audio's smaller floorstanding loudspeaker, with a 200 mm side woofer and the same four-channel 1,000 W amplifier.