Hifiverse

Standlautsprecher - Marten Design MINGUS Orchestra

Beschreibung, Bilder, technische Daten und Spezifikationen

Marten Design MINGUS Orchestra
Bildquelle - (c) Marten Design

The Mingus Orchestra is a four-way floorstanding loudspeaker from Marten of Sweden and the top model of the Mingus series. Marten places the Mingus series directly below its Coltrane series. Chief designer is Leif Olofsson. Marten was established in 1998, and its loudspeakers are made in Sweden.

Key specs that matter

On the front baffle are a 20 mm Pure Diamond driver, a 51 mm Pure Diamond driver, an 18 cm Pure Ceramic driver and four 20 cm aluminium sandwich drivers. Four 25 cm passive aluminium sandwich units are mounted on the back. Frequency range is 22 Hz - 100 kHz (±2 dB). Sensitivity is 89 dB (2.83 V/1 m), and impedance is 6 ohms (min. 3.1 ohms). Power rating is 450 W. Crossover frequencies are 350 Hz, 3.8 kHz and 8 kHz, all first order. Dimensions are 335 x 1730 x 540 mm (W x H x D), and net weight is 130 kg.

Engineering and use context

It is a bass reflex design. Marten uses Cell drivers from Accuton and refined the crossover to work with them. According to Marten, the Accuton Cell drivers give time coincidence, and the Cell bass units have long excursion.

Inside the crossover are copper foil air-core coils, silver/copper foil and silver foil capacitors and custom-made resistors. Internal wiring is from Jorma, with Jorma Statement wiring as an option. Speaker terminals are WBT nextgen in a bi-wire configuration.

Its cabinet is a 25-42 mm fibre laminate built from selected medium-density fibreboard, with solid wood tops and bottoms. Local craftsmen in Sweden make these tops and bottoms by hand. Five gloss finishes are offered - Piano Black, Piano Grey, Piano Plum, Piano Red and Piano Gold - and the tops and bottoms are also available in matte oak, walnut and zebrano.

Each cabinet stands on polished stainless steel stands with Marten Isolators. Marten developed the Isolators with IsoAcoustics to isolate the cabinet completely from the floor, and they are suitable for carpet.

Pairing

An amplifier stable into low impedance loads is required. The bi-wire terminals allow bi-wiring or passive bi-amping.

Alternatives

The Mingus Septet is a smaller four-way model of the Mingus series, with two 25 cm passive aluminium sandwich units on the back.

Spezifikationen

  • Modellbezeichnung

    MINGUS Orchestra

  • Untere Grenzfrequenz +/- 3dB (Hz)

    22 (+-2dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000 (+-2dB)

  • Empfindlichkeit (dB at 1 W/1m)

    89

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    450

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    33.5 x 173 x 54

  • Gewicht (kg)

    130

  • Offizieller Link