The M8C Active is a pair of active coaxial loudspeakers from Vestlyd, a Danish brand whose products are designed and engineered in Denmark. Vestlyd belongs to Nordic Hi-Fi A/S and draws on the experience of the HiFi Klubben retail chain. The pair is listed at EUR 1,149 with a three-year warranty. Alongside it the range has the M6C Active, the passive V12C and V15C, the battery-powered STAGE A4 and the PRO T1 and PRO T2 direct-drive turntables.
Key specs that matter
Each speaker uses Vestlyd's Power Monitor coaxial driver, with a 25 mm titanium dome compression tweeter placed inside the motor of a 203 mm paper cone woofer. Amplification is 4 x 75 W of PWM-driven Class D. Frequency range is 39.5 Hz - 22 kHz (-3 dB) and 36 Hz - 24 kHz (-6 dB). Audio inputs are HDMI eARC, an analogue XLR/6.35 mm jack combo, optical digital, USB-C and analogue RCA with an MM phono option. Bluetooth 5.1 supports AAC, aptX HD and aptX Low Latency, and maximum resolution is 24-bit/192 kHz. A sub-out is provided. Cabinets are MDF, each speaker measures 443 x 290 x 270 mm (H x W x D), and standby consumption is below 0.5 W.
Engineering and use context
In the Power Monitor layout the compression tweeter sits inside the woofer motor, and Vestlyd states that this gives time alignment of the two drivers. Its woofer cone acts as a horn for the tweeter and raises the tweeter's efficiency. According to Vestlyd, most active speakers use only two amplifiers for all drivers, while in the M8C each driver has its own 75 W channel. Bass output reaches below 40 Hz, and the company presents the pair as a system that needs no subwoofer.
Rear-panel buttons set the right/left assignment and fine-tune bass and treble. Three predefined sound profiles are stored, two of them for music and film. Both speakers power up automatically on all inputs except Bluetooth and phono. A 35 mm pole mount socket is provided, and finishes are black synthetic leather or oak PVC. In the box are a 3 m power cable, a 5 m speaker cable, a 1.5 m USB-C cable, a remote control with AAA batteries and a quick start guide.
Pairing
No external amplifier is required. A turntable with an MM cartridge connects to the phono input, and a television connects over HDMI eARC. The sub-out allows an active subwoofer to be added. Vestlyd makes the matching M-Stands.
Alternatives
The M6C Active is the smaller active coaxial model in the Vestlyd range.