Hifiverse

Standlautsprecher - Linkwitz LXstudio

Beschreibung, Bilder, technische Daten und Spezifikationen

Linkwitz LXstudio
Bildquelle - (c) Linkwitz

The LXstudio is an active three-way dipole loudspeaker from Linkwitz, developed by Siegfried Linkwitz and sold by LINKWITZ.store. It combines the LXsirius speaker with two LXsub4 dipole subwoofers. It was designed for a studio mixing symphonic music, where conventional large box monitors gave an uneven response, especially at low frequencies. A pair costs EUR 14,161 - 18,921 including VAT, and it is currently available only as a bundle with amplification.

Key specs that matter

Design is three-way, with active line-level crossovers. The LXsirius upper section has a small full-range open-baffle driver crossed over at 700 Hz with an LR2 slope to a woofer in an infinite transmission line, and it stands 1 m tall. Each LXsub4 carries two 254 mm (10 in.) drivers in a V-frame dipole and weighs 33 kg. Crossover to the LXsub4 is LR2 at 60 Hz. Frequency range is 25 Hz - 20 kHz. Compared with the LXsirius+2 configuration, the LXsub4 pair has 10 dB higher output capability. Every driver has its own amplifier channel.

Engineering and use context

On the LXsirius a diffusing and attenuating structure controls the rear radiation of the full-range driver, and Linkwitz says the polar response tends towards cardioid behaviour. Linkwitz gives less room mode excitation as the advantage of dipole woofers. Path length differences to the listener can be compensated in the DSP unit.

The music signal is split at line level by an electronic crossover, either an analogue ASP or a DSP. In the bundle this is the PowerBox 6pro NCore precision analog, a precision ASP followed by six channels of NCore amplification. Multicore cables with SpeakOn plugs connect it to the speakers.

Each LXsub4 is assembled from dark anthracite MDF with 45 degree mitred joints and a dull clear lacquer, with recessed cable channels, and a birch plywood version is offered. Colour options are Aluminum Black Woofer Cone(s), White and Chalk. Adding the LX521 Bridge and Top converts an LXstudio into an LX521.

Pairing

A source with line-level output is required, such as a turntable with phono stage, CD player or network streamer. The matching amplification is the PowerBox 6pro NCore precision analog.

Alternatives

The Linkwitz LX521-The Reference is the larger four-way dipole loudspeaker that uses the same LXsub4 woofers.

Spezifikationen

  • Modellbezeichnung

    LXstudio

  • Untere Grenzfrequenz +/- 3dB (Hz)

    25

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link