The Legato Duo is a 2.5-way floorstanding loudspeaker in the Legato series of Sonner Audio, the company from Merrimack, New Hampshire, led by Gunawan Surya. Sonner places the Legato series below its Allegro Reference models at a more attainable price point. Pricing was USD 9,500 per pair in North America and GBP 8,900 in the United Kingdom.
Key specs that matter
It is a 2.5-way design in a bass ported enclosure. Drivers are a 25 mm ring radiator tweeter, a 140 mm coated paper cone mid woofer and a 152 mm custom design aluminium cone woofer. Crossover frequencies are 200 Hz and 2.5 kHz. Sensitivity is 90 dB, and frequency response is 37 Hz - 23 kHz. Nominal impedance is 4 ohms (min. 3.8 ohms). Recommended power amplifier is 10 W to 300 W. Each speaker measures 380 x 680 x 1100 mm (W x D x H) and weighs 26.5 kg net, 36 kg shipped. Finishes are semigloss red rosewood and satin black.
Engineering and use context
In the ring radiator tweeter two ring-shaped diaphragms vibrate, with a phase plug mounted at the centre of the diaphragm. A chamber behind the diaphragm is shaped for air flow and reduces backward standing waves. Its opening in Sonner's tweeter acoustic panel is dimensioned to complement the cabinet time alignment and the crossover, with control of dispersion as the stated aim.
Both the coated paper mid woofer and the aluminium cone woofer of the bass module are built to Sonner's specification. Sonner keeps the two drivers at a similar size for frequency integration and dispersion. Each uses a magnet system with copper clad aluminium voice coil wire for large cone excursion, and the design limits air flow noise, frame cavity resonance and backward reflection.
Layers of selected wood are molded into a one-piece curved monocoque shell with no parallel walls. Its non-parallel shape reduces internal standing waves and resonance. This cabinet leans back at an angle for time alignment, and Sonner says the angle frees the crossover from electrical time domain compensation. A proprietary port outer surface follows the outer radius of the shell. Inside, the Symmetrical Panoramic Design network, part of Sonner's Panoramic Crossover Technology, controls the frequency response, impedance variation and phase of each driver. Parts are wired point to point without a printed circuit board, and every crossover is measured against its theoretical design before it is potted in epoxy compound.
Pairing
Sonner states that the Legato series can be driven by small or large tube amplifiers or solid-state amplifiers. An amplifier stable into a 4 ohm load is required.
Alternatives
The Sonner Audio Legato Semis is the two-way floorstanding loudspeaker of the same series, with one 140 mm mid woofer, 87.5 dB sensitivity and an 8 ohm nominal impedance.