Hifiverse

Standlautsprecher - DALI KORE

Beschreibung, Bilder, technische Daten und Spezifikationen

DALI KORE
Bildquelle - (c) DALI

KORE is the flagship passive floorstanding loudspeaker of DALI, built at the company's factory in Nørager, Denmark. DALI first showed it at High End Munich 2022 as the successor to the EPICON 8, and the launch price was EUR 80,000 per pair. Several of its parts, among them the EVO-K Hybrid Tweeter and SMC Gen-2 magnet systems, were later used in the EPIKORE range.

Key specs that matter

DALI gives the crossover principle as 3½ + ½-way, with crossover frequencies at 390 Hz, 2.1 kHz and 12 kHz. Two 292 mm (11.5 in.) bass drivers, a 178 mm (7 in.) midrange driver, a 35 mm soft dome and a 10 x 55 mm planar element make up the driver complement. Frequency range is 26 Hz - 34 kHz (±3 dB), and sensitivity is 88 dB (2.83 V/1 m). Nominal impedance is 4 ohms (min. 3.2 ohms at 72 Hz). Maximum SPL reaches 118 dB at 1 m, with a recommended amplifier power of 50 - 1500 W. Each speaker measures 448 x 1675 x 593 mm (W x H x D) and weighs 160 kg in total.

Engineering and use context

Both bass drivers use dual voice coil Balanced Drive technology and SMC Gen-2 magnet material, and each sits in its own 72 litre reflex enclosure tuned to 22 Hz with dual-flare bass ports. According to DALI, Balanced Drive SMC is aimed at odd-order harmonic distortion. The 178 mm unit is the company's first dedicated midrange driver. It combines Balanced Drive SMC with a paper and wood fibre diaphragm and a lighter, thinner rubber surround, and it is mounted in an attenuated open back line.

Inside the EVO-K Hybrid Tweeter, the 35 mm soft dome is developed and manufactured in-house, and the planar element has a new magnet design with increased sensitivity. DALI's crossover uses the first inductors made with low-loss SMC material.

The cabinet is a curved 28 mm birch laminate composite with substantial bracing, separate enclosures and anchored baffles, plus die-cast aluminium, thermoset resin and cast composite structural elements. Under it sits a precision-cast resin composite plinth weighing more than 34 kg. This non-magnetic housing holds the large crossover components, shielding the drivers from them and isolating the crossover from vibration and air pressure. The finish has six layers of clear lacquer, and DALI lists Ammara Ebony, Ammara Ebony Black Metal, Navy Blue, Racing Green, Steel Grey and Velvet Red in high gloss.

Pairing

An amplifier stable into 3 ohms is required. The gold-plated terminals accept bare wire, spades and 4 mm plugs and allow bi-wiring or bi-amping.

Alternatives

The EPIKORE 11 is the largest floorstanding loudspeaker of DALI's EPIKORE range.

Spezifikationen

  • Modellbezeichnung

    KORE

  • Untere Grenzfrequenz +/- 3dB (Hz)

    26

  • Obere Grenzfrequenz +/- 3dB (Hz)

    34000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    50 - 1500

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten