Hifiverse

Standlautsprecher - Gryphon Audio KODO

Beschreibung, Bilder, technische Daten und Spezifikationen

Gryphon Audio KODO
Bildquelle - (c) Gryphon Audio

The Kodo is a four-way twin-tower loudspeaker system from Gryphon Audio Designs of Denmark. It was introduced at High End Munich in 2016 at EUR 220,000, including a 10-year warranty and factory setup, and later listed at EUR 260,000 or USD 390,000. Each channel has an active bass tower and a passive mid/high frequency tower, 38 drivers in total, and Gryphon groups it with the Trident II as a statement system.

Key specs that matter

System response is 16 Hz - 25 kHz (-3 dB, depending on Q setting and room). Sensitivity is 96 dB (1 W/1 m) for the mid/high tower, and nominal impedance is 4 ohms. Duelund principle crossover frequencies are 250 Hz, 700 Hz and 2.5 kHz. Each bass tower holds eight 203 mm bass drivers and a class AB amplifier rated 1000 W RMS (4 ohms), 4000 W peak, with THD+N below 1 % and +32 dB gain. Dimensions are 540 x 2375 x 880 mm (W x H x D) for the bass tower and 440 x 2320 x 660 mm for the mid/high tower. The system ships in eight wooden crates with a total of 1354 kg.

Engineering and use context

Each mid/high tower has three modules, with four 114 mm ScanSpeak Illuminator upper midrange drivers and six 140 mm lower midrange drivers arranged symmetrically around a Mundorf Air Motion Transformer. The AMT has a Kapton film diaphragm with aluminium conductor traces and 100 dB sensitivity, and hand-tuned Duelund graphite resistors set it to -1, 0 or +1 dB. Its passive network is hand-adjusted, with Duelund air-core inductors, flat-wound Jensen copper inductors and Duelund graphite resistors, and the amplifier module applies a permanent 28 V bias to the crossover capacitors. Every driver sits on its own baffle, and the concave front is time-aligned.

Gryphon's bass amplifier weighs 70 kg per tower and uses Sanken bipolar output transistors, a linear power supply and no negative feedback. A separate active crossover per channel is isolated in the bass tower, and the bass drivers have dual-magnet motors in four sealed, braced modules. A remote sets bass level (-100 to +8 dB in 0.5 dB steps), Q (0.30, 0.35 or 0.40) through the Linkwitz-Greiner Q controller, a 16 Hz second-order low cut and mute, and the master tower passes commands over a data cable. Inputs are XLR and RCA with loop outputs and a +12 V link.

Cabinets are MDF modules with 8 mm aluminium supports, bitumen-damped HDF outer shells and solid aluminium bases with adjustable feet. Detachable Wings take custom finishes, carbon fibre among them.

Pairing

An external stereo power amplifier is required for the mid/high towers. The XLR and RCA loop outputs of the bass tower connect to the inputs of that amplifier.

Alternatives

The Trident II is Gryphon's single-enclosure three-way floorstanding loudspeaker with a 500 W built-in bass amplifier.

Spezifikationen

  • Modellbezeichnung

    KODO

  • Untere Grenzfrequenz +/- 3dB (Hz)

    16

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25 000

  • Empfindlichkeit (dB at 1 W/1m)

    96

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    1000

  • Größe (sm)

    54 x 237.5 x 88

  • Gewicht (kg)

    135.4

  • Offizieller Link