The kO-R2 is a two-way multisectoral horn loudspeaker developed by Klipsch with Ojas, the studio of acoustic designer Devon Turnbull. It is the second product of that collaboration, after the kO-R1 of 2024, and was unveiled at Milan Design Week in April 2026 ahead of a global launch in June 2026. Production is limited to 600 pairs worldwide, each handcrafted in Hope, Arkansas. Price is USD 11,995 per pair.
Key specs that matter
A K-706 compression driver on the multisectoral horn covers the high frequencies, and a K-33-E 381 mm (15 in) woofer works below the 760 Hz crossover point. Frequency response is 39 Hz - 20 kHz (±3 dB) and 29 Hz - 21 kHz (-10 dB), measured at 3 m in half-space anechoic conditions. Sensitivity is 97 dB (2.83 V/1 m). Nominal impedance is 8 ohms (min. 4.2 ohms at 100 Hz). Power handling is 300 W (34.6 V, 40 Hz - 10 kHz, AES pink noise with 6 dB peaks), and calculated maximum continuous output is 118 dB from 40 Hz to 10 kHz. Horizontal coverage is 90 degrees (±30 degrees, 500 Hz - 20 kHz), vertical coverage 70 degrees (±20 degrees, 3 - 20 kHz). Dimensions are 644.5 x 1155 x 565 mm (W x H x D), and net weight is 54.65 kg.
Engineering and use context
Its horn is an exposed 15-cell multisectoral design in sandcast aluminium. Klipsch names three sources for it - the multisectoral approach of the Western Electric 25A, the throat expansion geometry of the KS12025 and the faceted look of the Altec multicellular horns. Square and isosceles trapezoid mouths give an even frequency distribution in the horizontal and vertical planes. The horn sits on a die-cut steel horn mount.
Each vented cabinet is made of 13-ply Grade A Baltic birch plywood with full butt joint construction. The cabinet carries a five-step high-frequency gain attenuator and anodised aluminium 5-way binding posts. It also has anti-vibration rubber feet and a laser-engraved metal ID plate. Cabinets come in Red Oak veneer or Hammertone, both with a powder coated matte black horn.
Pairing
An amplifier stable into 4 ohms is required. The 5-way binding posts accept bare wire, spade lugs or banana plugs.
Alternatives
The Klipsch Forte IV is a three-way Heritage Series floorstanding speaker with a 305 mm woofer and a 381 mm passive radiator.