B.E.C. Akustik IC120
Bildquelle - (c) B.E.C. Akustik
The IC120 is the tallest model in the IC series of slim line-array speakers from BEC Akustik, a division of BEC Gesellschaft für Produktmanagement mbH in Moers, Germany. The series runs IC28, IC50, IC70, IC100 and IC120, and the matching wall brackets grow in length from 278 mm to 1199 mm across the five models. It is made for wall mounting, ceilings, stands and stacked pairs in homes, home cinemas and commercial rooms, and a waterproof IC120 WP version with IP65 certification exists for boats and outdoor areas.
Key specs that matter
Four patented BEC Akustik broadband drivers, each measuring 20 x 120 mm, sit in a line inside an aluminium housing just 37.5 mm wide, 1206 mm tall and 23 mm deep, with a weight of 1.2 kg. Nominal impedance is 4 ohm, and the frequency range reaches from 120 Hz to 20 kHz at the -6 dB points. Sensitivity is 88 dB at 1 W and 1 m, and the maximum rated sound pressure is 106 dB. Rated power handling is 40 W with an 80 W maximum. Horizontal dispersion covers 180 degrees and vertical dispersion 40 degrees. The signal enters through a two-pole Phoenix terminal with 5.08 mm pitch, and the permitted operating temperature runs from 0 to 100 degrees C.
Engineering and use context
BEC has worked with permanent magnets and magnet systems since the 1990s, and its drivers combine a conventional loudspeaker layout with ideas taken from magnetostatic designs. Two NdFeB bars create the magnetic field, and multilayer printed circuit boards replace the classic voice coil. The drivers follow a defined arrangement with matched reflex openings and sit behind an acoustic filter cover. A passive BEC crossover is used by default, while active setups call for a 6 dB Bessel filter at 180 Hz. A metal angle bracket comes in the box, and options include an in-wall housing, a ceiling mount adjustable in length, a magnetic wall bracket with permanent magnets and a 420 mm stacking adapter that joins two IC speakers into one unit. For freestanding use BEC offers the curved Amor stand, 1450 mm tall, and the Tajine wooden foot made in the Sauerland region. Finishes are black, white, silver and gold, with special colours on request.
Pairing
The IC120 leaves the bass range to a separate subwoofer, and BEC pairs it with its passive subwoofers, such as the 12-inch Paul 12.1, and with the Julia+ 8-channel DSP amplifier, which carries BEC presets and delivers 180 W per channel into 4 ohm. In one living-room installation in Ratingen, two stacked pairs of IC120 were combined with an IC100 as the centre speaker and a Paul 12.1 subwoofer.
Alternatives
The BEC Akustik IC100 is the shorter model in the same series, with three broadband drivers, a 6 ohm load and a maximum rated sound pressure of 102 dB.