Hifiverse

Standlautsprecher - GURU Audio Guru 20

Beschreibung, Bilder, technische Daten und Spezifikationen

GURU Audio Guru 20
Bildquelle - (c) GURU Audio

The Guru 20 is the smallest floorstanding loudspeaker from Guru Audio of Sweden. It uses the same drivers as the Guru 12 stand-mount in a larger cabinet, which Guru gives as the reason for its greater bass extension. Guru was founded in 2007 by violinist Erik Ring, industrial designer Erik Espmark and acoustic engineer Ingvar Öhman, and its loudspeakers are made by hand in the EU. Finishes are Fog, Black, White, Oak and Walnut.

Key specs that matter

Typical in-room response is 28 Hz - 30 kHz. Sensitivity is 88 dB (2.83 V, 1 m). Nominal impedance is 5 ohms, with a 4 ohm minimum. Its crossover band is 2 - 7 kHz, and recommended amplifier power is 20 - 160 W. Drivers are a 19 mm soft dome tweeter and a 125 mm polypropene cone mid/woofer. Enclosure type is a Helmholtz resonator in MDF and steel. Dimensions are 188 x 828 x 220 mm (W x H x D).

Engineering and use context

Both drive units come from the Guru 12, where the company describes the 125 mm mid/bass as its own proprietary driver and the tweeter as a silk dome that reaches beyond 30 kHz.

Guru Audio bases its designs on ordinary rooms and on human hearing rather than on anechoic measurements. Its speakers have a frequency response adapted to include the sound reflected from the rear wall and the floor, with a bass roll-off built in as the inverse of the boundary gain. According to Guru, this principle provides reinforcement in the lower bass range from small enclosures. A second principle, which the company calls mending stereo, sets an adjusted response curve as the design target, so that the direct sound at each ear and the later sound from the opposite speaker sum to a flat response.

Pairing

An amplifier designed for 4 to 8 ohm loads and stable down to 4 ohms is required.

Alternatives

The Guru 28 is the larger Guru floorstanding speaker, with a 102 mm mineral fibre cone midrange, separate woofers and crossover points at 100 Hz and 2 - 7 kHz.

Spezifikationen

  • Modellbezeichnung

    Guru 20

  • Untere Grenzfrequenz +/- 3dB (Hz)

    28

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    5

  • Anforderungen an den Endverstärker (W)

    20 - 160

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    18.8 x 82.8 x 22.0

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten