Hifiverse

Standlautsprecher - Alcons Audio GR20

Beschreibung, Bilder, technische Daten und Spezifikationen

Alcons Audio GR20
Bildquelle - (c) Alcons Audio

The GR20 from Alcons Audio is a 2-way loudspeaker built as a high-performance point-source system for portable and permanent professional applications. It belongs to the G-series of the Dutch pro-ribbon maker together with the GB181 subwoofer. The first production deployment was at Amsterdam Dance Event 2025 in a 7.1.6 Dolby Atmos layout, and the system was presented at ISE 2026.

Key specs that matter

Drive units are one RBN602rs 152 mm pro-ribbon driver and two AMB10NDAIC-4 254 mm neodymium woofers in a vented enclosure, with passive filtering. Frequency response is 54 Hz - 20 kHz (±3 dB), extending to 45 Hz (±10 dB). Nominal sensitivity is 101 dB (200 Hz - 10 kHz) and nominal impedance is 8 ohms. Dispersion is 80° x 50° or 50° x 80° (at 20 kHz). Nominal peak SPL is 130 dB with a Sentinel3 and 135 dB with a Sentinel10 (200 Hz - 10 kHz). The cabinet measures 640 mm high, 312 mm wide and 352 mm deep, weighs about 26 kg and carries a 6-year limited warranty.

Engineering and use context

The Alcons-proprietary pro-ribbon driver is non-compressed and has a linear response at any SPL, and Alcons quotes up to 90% less distortion. Its impulse response, compression-less principle and flat response give 3 to 6 dB better gain-before-feedback than traditional systems. Peak power handling of the ribbon is 1,250 W for 200 ms, a 1 to 15 RMS-to-peak dynamic range.

Directivity of 80 x 50 degrees is patented, and a revolvable waveguide keeps that pattern with the GR20 in a horizontal position. The RBN602 is mounted in a tight-packed, vertically symmetrical configuration between the two mid-bass woofers. Each custom-designed woofer has Active Coil technology. Their two 76 mm voice coils work in passive-filtered tandem with the 152 mm voice coil of the ribbon, and the whole system is driven from one amplifier channel.

Signal Integrity Sensing pre-wiring provides cable and connector compensation between the GR20 and an SIS-equipped ALC controller, for a system damping factor of 10,000 regardless of cable length. Mounting options include the BRKGR20 and BRKGR20HOR brackets.

Pairing

An Alcons ALC amplified loudspeaker controller is required, with factory presets and VHIR processing. The minimum recommended drive is the Sentinel3. Inputs on the controller are 192 kHz AES3 digital. The cabinet has two Speakon NL4 sockets for input and link.

Alternatives

The Alcons Audio VR12/90 is a 2-way pro-ribbon point-source loudspeaker in the brand's V-series.

Spezifikationen

  • Modellbezeichnung

    GR20

  • Untere Grenzfrequenz +/- 3dB (Hz)

    54

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    101

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    640 x 312 x 352

  • Gewicht (kg)

    26

  • Offizieller Link