Hifiverse

Standlautsprecher - TAD EVOLUTION TWO E2

Beschreibung, Bilder, technische Daten und Spezifikationen

TAD EVOLUTION TWO E2
Bildquelle - (c) TAD

The Evolution Two (TAD-E2) is a 2.5-way bass-reflex floorstanding speaker system from TAD Laboratories of Japan and part of the company's Evolution Series. It shares its 25 mm beryllium tweeter diaphragm with the TAD-E1TX and TAD-ME1. Four finishes are offered - Piano Black (K), Glossy White (GW), Slate Blue (SB) and open-pore satin Walnut (WN).

Key specs that matter

Drive units are two 15.5 cm cone woofers and a 2.5 cm beryllium dome tweeter. Frequency response is 30 Hz - 60 kHz. Crossover frequencies are 90 Hz and 2.8 kHz. Sensitivity is 87 dB (2.83 V, 1 m). Rated impedance is 6 ohms, with a minimum of 4.5 ohms, and maximum input power is 150 W. Dimensions are 320 x 1,085 x 405 mm (W x H x D), or 1,113 mm high with spikes, and weight is 32 kg per unit.

Engineering and use context

TAD mounts the tweeter on a newly developed waveguide of rigid cast aluminium that controls its directivity. The diaphragm shape comes from HSDOM (Harmonized Synthetic Diaphragm Optimum Method) computer analysis, for a response up to 60 kHz.

Both woofers use a MACC (Multi-layered Aramid Composite Cone) diaphragm with a delta bracing structure, a flexible vibration-suppressing centre cap and a corrugated surround back-coated with damping material. Their motors combine a long voice coil with a short magnetic gap and a long pole piece for symmetrical magnetic flux. A double short ring reduces inductance fluctuations over the entire frequency range.

The bass-reflex port sits in the bottom of the enclosure and opens to the front and the rear. A slanted baffle, kept as small as possible, reduces diffraction. Inside the SILENT (Structurally Inert Laminated Enclosure Technology) enclosure, sound-absorbing material is mounted midair on the braces. Woofer positions are set relative to the enclosure size to reduce internal standing waves.

In the crossover network, the filter for the bottom woofer lowers its sound pressure level and brings its phase in line with that of the upper woofer. This bottom woofer has its own network assembly, mounted apart from the others to limit magnetic flux leakage. A 10 mm solid steel base plate is attached under the enclosure, and three spikes and a tip-resistant spike support it.

Pairing

Its input terminals allow bi-wiring, and two short cables are included. The matching integrated amplifier is the TAD-A1000.

Alternatives

The Evolution One TX (TAD-E1TX) is the larger floorstanding speaker of the same Evolution Series.

Spezifikationen

  • Modellbezeichnung

    EVOLUTION TWO E2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    60 000

  • Empfindlichkeit (dB at 1 W/1m)

    87

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    32.0 x 108.5 x 40.5

  • Gewicht (kg)

    32

  • Offizieller Link