The Evo 1 is a passive floorstanding loudspeaker from AudioNec, a French company that presented its first products at High End Munich in 2010. Founder Francis Chaillet had earlier built a dedicated music server, followed by the Answer loudspeakers. The Evo 1 is the first model of the Evo line and the foundation of the Evo modular system, with the Evo 2, Evo 3 and Evo 4 as the higher levels. Every AudioNec speaker is assembled by hand in the company workshop near Paris and tested before shipping.
Key specs that matter
Three drive units divide the band. A super tweeter covers 10 - 45 kHz, the DuoPole 31 covers 400 Hz - 10 kHz, and a 22 cm woofer covers 35 - 400 Hz. Nominal impedance is 8 ohms and sensitivity is 90 dB. Recommended amplifier power is 30 - 200 W. Each cabinet measures 46 x 104 x 47 cm (W x H x D) and weighs 58 kg.
Engineering and use context
At the centre of the design sits the DuoPole 31, which AudioNec describes as a wideband, full-range driver and a direct descendant of its original DuoPole 51. The super tweeter is aligned for correct acoustic phase with the DuoPole.
Its woofer comes from the ScanSpeak Revelator Series and is reflex-loaded through a port. This woofer is shared with all other loudspeakers of the Evo range.
All AudioNec products are 100% made in France, although some of the components come from other countries.
Pairing
An amplifier rated into 8 ohms is required. Its output should fall within AudioNec's recommended power window.
Alternatives
The Evo 2 uses the same drivers and adds a 28 cm subwoofer in a sealed cabinet that extends the response to 20 Hz.