Hifiverse

Standlautsprecher - CML Music Etude Tri-Linear Array

Beschreibung, Bilder, technische Daten und Spezifikationen

CML Music Etude Tri-Linear Array
Bildquelle - (c) CML Music

The Etude Tri-Linear Array, or ETLA, is a compact floorstanding loudspeaker from CML Music, the British company of Dr Christopher Mark Liauw, who is also behind Curvi Hi-Fi. It had its world premiere at the North West Audio Show 2026 at Cranage Hall. CML Music developed it as a high-sensitivity design for low-powered amplification. It joins the Etude 5 and the Etude High Sensitivity Bipole (EHSB) and shares its compression tweeter with the EHSB. The ETLA is sold directly at GBP 3,000 per pair in the standard satin crackle finish with M8 polypropylene-tipped gliders, and a grille is expected to add about GBP 200 per pair.

Key specs that matter

Each cabinet has three vertical linear arrays of four 85 mm BMR (balanced mode radiator) drive units and a compression tweeter beside the central array. In-room frequency response is 32 Hz - 20 kHz (±6 dB). Sensitivity is approximately 99 dB/W at 600 Hz and 1 m. Nominal impedance is 8 ohms (min. 5 ohms, at 10 Hz), average impedance is 8.9 ohms, and minimum EPDR is 3.5 ohms at 54 Hz. Programme power handling is 240 W, with each BMR unit rated at 20 W. Dimensions are 760 x 400 x 386 mm (H x W x D, height including gliders), and weight is about 25 kg.

Engineering and use context

All twelve BMR units share one sealed internal volume. Above about 4 - 5 kHz the tweeter comes in with a second-order roll-in. An angled front baffle aligns the listening axis with a seated listener, and the speaker is intended to stand close to the rear wall, using boundary reinforcement for bass extension.

Both outer arrays have selectable roll-off settings. They change the depth of a dip in the response and the horizontal dispersion. Tweeter level is adjusted by solderless resistor changes, accessible from the rear of the cabinet.

Its cabinet is CNC-machined from 18 mm higher-density exterior-grade MDF, with extensive internal bracing and no fibre or foam absorbent. Crossover components come from Jantzen, ClarityCap, Bourns, Customcoilsnstuff and Vishay, on elastomeric isolation mounts. Piano lacquer and veneer finishes are offered at extra cost.

Pairing

CML Music states that amplifiers of 3 W and up, including single-ended tube designs, can drive the ETLA. For multichannel systems its voicing can be matched to the EHSB.

Alternatives

The Etude 5 is the other CML Music floorstanding loudspeaker, with a linear array of four 85 mm BMR units, a ring radiator tweeter and transmission line loading.

Spezifikationen

  • Modellbezeichnung

    Etude Tri-Linear Array

  • Untere Grenzfrequenz +/- 3dB (Hz)

    32

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    99

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    76.0 x 40.0 x 38.6

  • Gewicht (kg)

    25

  • Offizieller Link

    N/A